Exhaust Systems

Milltek Sport Fiesta ST 180 Back Box Delete Pipe - Race Pipe - Milltek Sport Exhaust Fully Stainless Steel Open Pipe workfits to existing Milltek Mid pipe and Tail Pipes The Milltek Cat Back Exhaust system has many different versions, all contain a rear silencer box but there are two versions already. Non Resonated - which has theperfect mid ground tone(Race) Non Resonated - which was the loudest availableand Now Milltek have made this !!The Full Race Rear Box Delete which lifts noise another step higher whilst still providing a beautiful deep tone. This Milltek Rear Box Delete for the Fiesta ST180 will fit all existing Milltek systems and remove the rear silencer totally from the car.Your existing Milltek detatchable tail pipes will fit the two outlet pipes and exit in the excat same place as they do now Not for Road Use Designed for Motorsport / Race Applications only to be fitted with Milltek Sport Centre Sections only Part No. Tip Style Pipe Diameter Race EC Valvesonic SSXFD200 2.76'' (70mm) Yes Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Description Scorpion Exhausts GPF Back WITH Valve - MK8 Fiesta ST Brand new from Scorpion, Created on our very own MK8 ST we present to you the brand new GFP (Gasoline Particulate Filter) back exhaust system for the MK8 ST The system is a full 70mm diameter none resonated with the option of valved or none valved (This listing is for WITH Valve) Twin 90mm Daytona Tips in either Polished or Black Ceramic are available with this system. Scorpion are currently developing a downpipe with catalyst and a GPF Replacement to follow   Since the early 1970’s Ford have been associated with producing an array of performance cars for the road beginning with the Mk1 Escort RS1600 which paved the way for the iconic models of the mid 80’s including the Escort RS Turbo & Sierra RS Cosworth’s through to the current day ST & RS models all of which benefitted from the development of performance Scorpion exhausts over the years. Success in rallying and touring cars along with Scorpions know how in producing sports exhausts sees true track to road technology transfer across the range. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SFDS089CF Product Type GPF-Back Valve Yes Fitment Years 2018 - 2020 Fits To OEM / Scorpion Model Fitment Fiesta ST MK8 (Pre September 2020) Pipe Diameter 70mm/2.75" * Tailpipe Ascari Tailpipe Diameter 90mm Shipping Dimensions 102cm x 42cm x 33cm Notes Original System will need cutting for fitting.Fits Pre September 2020 models.

Read more less

Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO7

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Fiesta ST performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This sports exhaust is part of the Cobra Sport Venom range and is extremely loud. This exhaust is sold for non road use only and will exceed all legal noise regulations. All relevant fittings and gaskets are supplied. Cobra Sport have taken their range of exhausts for the Ford Fiesta ST180 to the next level with the release of a Venom style system finished with either a single or twin tailpipe. The new Venom systems remove the back box found in our cat back systems to offer an exhaust system with unrivalled sound and tone. The bore size has been increased to 3” (76.2mm) and the stainless steel pipework which runs the full length of the vehicle allowing unrivalled flow rates whilst creating the pitch perfect aggressive sound preferred by many ST180 owners. The Cobra Sport system Venom system delivers a significant weight saving over standard. Testing of the Venom system resulted in a staggering 21% reduction in weight from the OE system’s 14.42kg, with the Cobra Sport system weighing in at only 11.2kg. The most significant improvement of the Venom system is the incredible sound quality produced by the simplified pipework. The volume of the Venom cat back system which includes a resonated section increases by +8.7db to 89.9db at 4000rpm. Matched with the additional Sports Cat front pipe the sound levels at 4000rpm rise by +15db to 96.2db creating an incredibly vibrant deep sporty exhaust tone. Part number: FD77 We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less

Non-Resonated: Non-resonated (louder). Polished Tips. Requires Fiesta Zetec S rear valance (part number 1833264) available from your local Ford dealer Part No. Description Tailpipe Pipe Diameter Race EC **MSFD239** **Connecting Pipe from Milltek Cat Back to OE Cat 2.37" (60.30mm) MSFD241REP Front Silencer Rep Pipe MSFD200 Over-Axle Pipe MSFD201 Rear Silencer Assembly   **{Not required when fitting as a turbo back system}** Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK. Resonated: Resonated (quieter). Polished Tips. Requires Fiesta Zetec S rear valance (part number 1833264) available from your local Ford dealer Part No. Description Tailpipe Pipe Diameter Race EC MSFD239 Connecting Pipe from Milltek Cat Back to OE Cat 2.37" (60.30mm) MSFD241 Front Silencer MSFD200 Over-Axle Pipe MSFD201 Rear Silencer Assembly Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

  Cobra Sport exhausts systems come with a lifetime warranty for the original purchaser, giving you ultimate peace of mind. All Cobra Sport exhausts are manufactured in the UK from certified grade 304 stainless steel and TIG welded for a superior quality finish. EML lights may activate after removing the standard O/E catalyst. An ECU Re-map is recommended to correct this problem and stabilise all power increases. The product images shown are for illustration purposes only and due to product enhancement may not be an exact representation of the product. For any questions, queries or simply for our advice on these products call us on + 44 (0)114 244 7123. Product Description Reviews Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. Our sports exhausts range is fully guaranteed to give you assurance of our quality. These Fiesta ST performance exhausts are made in 3"/76.2mm pipework and fit from the catalytic converter section backwards (Cat-back) these exhausts replace the centre and rear sections. This resonated exhaust includes the centre silencer and has a subtle but sporty tone. This exhaust however, is also available as a non-resonated version (excluding the centre silencer) which is a louder option. All relevant fittings and gaskets are supplied. Please note: Cobra systems are made to order with a rough lead time of 7-21 working days COBRA SPORT PRODUCT REVIEW   The system benefits from all of the usual Cobra Sport refinements with mandrel bent, TIG welded, grade 304 stainless steel used throughout the systems as standard. You can be assured of only the best quality in a Cobra Sport system. Matt Thomas, Sales Manager at Cobra Sport says “The new ST system has provided us with some exciting results, independent testing has revealed that the 3” Turbo back upgrade produces an additional 13bhp from the standard system with a 10% increase in torque. Overall the Cobra Sport system makes a great car even better”. The styling of the system is finished off with either a subtle ‘OE look’ twin 3” slash-cut tailpipe in a highly polished 304 stainless steel finish. RELATED MEDIA FILES   Example of Fiesta ST180 3" performance exhaust (cat back - resonated)   Interior Exhaust example of Fiesta ST180 3" performance exhaust (cat back - resonated) Example of Fiesta ST180 3" sports exhaust (Cat back - non resonated) Cobra Sport Exhausts Ford promotional video.

Read more less

Introducing the C:Performance Decat for the Fiesta MK7 ST180/ST200 Made by Scorpion Exhausts exclusively for CEUK. Combing British made #RedPower with #Enhanced Allows exhaust gases to flow much faster equalling More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car)   Fitment Years: 2013 - 2017 Model: ST 180 / ST 200 Fits To: OEM / Scorpion / Milltek / Cobra / Mongoose / KMS Pipe Diameter: 76mm/3"     This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. 

Read more less

Scorpion Exhausts Sports Catalyst Stainless Steel Ford Fiesta ST 180/200 2013 Onward Sports Catalysts A catalyst is a key component in emission control. It is also the most restrictive component of an exhaust. Our Sports Catalysts increase the gas flow while maintaining filtration rates. Scorpions Red Power engineers score yet another 1st by bringing to the market an exhaust for Ford's latest Hot Hatch the ST180. Fitment Years: 2013 - 2017 Model: ST 180 / ST 200 Fits To: OEM / Scorpion Pipe Diameter: 76mm/3" This Sports Catalyst is interchangable with O.E. Catalyst O.E Cat Back +Sports Cat Power (BHP) 175 182 185 Weight (KG) Cat Back 14.2 +Sports Cat 18.85 13.5 17.3 Noise (dB) 85.5 95 94 Scorpion Exhausts Sports Catalyst Stainless Steel Ford Fiesta ST 180 2013 Since the early 1970’s Ford have been associated with producing an array of performance cars for the road beginning with the Mk1 Escort RS1600 which paved the way for the iconic models of the mid 80’s including the Escort RS Turbo & Sierra RS Cosworth’s through to the current day ST & RS models all of which benefitted from the development of performance Scorpion exhausts over the years. Success in rallying and touring cars along with Scorpions know how in producing sports exhausts sees true track to road technology transfer across the range. TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Product Type Turbo-Downpipe Fitment Years 2013 - 2017 Fits To OEM / Scorpion Model Fitment ST 180 / ST 200 Pipe Diameter 76mm/3" * Shipping Dimensions 58cm x 33cm x 16cm Notes Engine management light may be activated, Stage 2 ECU remap recommended

Read more less

Allows exhaust gases to flow much faster. More Power! Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car) This part is sold for motorsport and off road use only and will NOT pass an MOT emissions test or police roadside checks. AIRTEC part no: ATEXHFO8

Read more less

AS Performance downpipe de-cat for Focus MK3 ST250 The Original Catalyst and down pipe , unlike the older ST225 and Focus RS mk2, are made in one piece. This new design features some restrictive bends and an exit bore size of only 70mm. With a new bore size of 70mm the new AS performance Replacement Down Pipe has over 50% more capacity. This part is sold for motorsport and off road use only and will NOT be able to pass a UK MOT emissions test or police road side checks. AIRTEC part no: ATEXHFO5

Read more less

This Cobra Sport exhaust is made with T304 grade stainless steel, mandrel bent and Tig welded which will allow a smooth flow to maximize power gains. This part is made in 3"/76.2mm bore pipework and fits from the turbo to the centre section. This part will enable you to pass a UK MOT emissions test or police road side checks. All relevant fittings and gaskets are supplied. (Except turbo gasket). Part No: FD71 We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less

Section 59, full 3" pipework and huge 4.5" rolled in slash cut tail pipes Pipework Bore – 76mm High quality T304 stainless steel aftermarket performance exhausts with Mongoose’s lifetime guarantee. All Mongoose systems offer superb fit, exceptional build quality, performance increase, great looks and the ultimate in sound. Please note that those vehicles fitted with catalytic converters as standard should remove them for competition / display use only. The vehicle will not pass an M.O.T without a catalytic converter. For the ultimate in sound and performance the only choice has to be Mongoose. We aim to deliver all exhaust products within 7-10 working days of placing your order. However, please allow up to 20 days for deliveries.

Read more less