Performance - Seat Leon MK2

AP Racing Formula DOT 5.1 Road / Competition Clutch & Brake Fluid. Formula DOT 5.1 is a premium specification Motor Vehicle Brake and Clutch Fluid which conforms to and exceeds the current international specifications U.S. FMVSS No 116, DOT 3, DOT 4, and DOT 5.1, S.A.E. J1703, SAE J1704 and ISO4925. - Suitable for High Performance Road Applications including vehicles fitted with ABS and ESP. - Superior -40°C (-40°F) viscosity makes it suitable for vehicles operating in cold climates. - AP Racing Formula DOT 5.1 is non silicone based. - AP Racing Formula DOT 5.1 fluid will mix safely with other DOT 5.1 fluids along with DOT 3 and DOT 4 Fluids conforming to the above specifications. - Family Part No. - CP4510-20 (20 Bottles).- Typical™ New Dry Boiling Point - 275°C (527°F)- Wet™ E.R. (Equilibrium Reflux) Boiling Point - 184°C (363°F)

Read more less

The calipers included in this kit come from the Audi TTRS / RS3 8P and are made by Brembo. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black, silver, grey or red with the Aston Martin logo but we can offer these calipers in almost any colour with or without almost any logo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 4 Piston Brembo calipers2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved or Drilled)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing FITS: AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TT 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

This front brake adaption kit allows the fitment of Audi TTRS 8J / Audi RS3 8P Calipers to VAG stock 340mm or 345mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers1x Set of Stainless Steel Braided Front Brake Lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x TTRS/RS3 4 Piston Calipers (Part No’s: 8J0615107B / 8J0615108B)2x 340/345mm front brake discs (Part No: 8J0615301G or 1K0615301M or our own VBT Hooked discs 8J34030-GA or 1K34530-GA)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing FITS: AUDI TT 8S AUDI A3 8P AUDI A3 8V AUDI S3 8P AUDI S3 8V AUDI TT 8J SEAT LEON MK2 SEAT LEON MK3 SEAT TOLEDO 5P SKODA OCTAVIA MK2 SKODA OCTAVIA MK3 VW CADDY 2K MK3 VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1K VW PASSAT B7 VW PASSAT CC VW SCIROCCO

Read more less

WHEEL FITMENT: Whilst we do try to ensure all our brake kits fit behind the majority of wheel types both stock and aftermarket, we make no guarantees that they will. There is a chance you will need wheel spacers to clear our brake kits. Please take the appropriate steps to ensure wheel clearance before final installation. DRILLED DISCS: Drilled discs are intended for light use, if crack form from drilled holes they have been used too hard and this is not something that is covered under warranty. If outright performance is required we strongly recommend grooved or J hooked. PRICES: - All prices shown exclude and include VAT and are correct at time of publishing and are subject to change without prior notice. - Prices do not include Shipping or Installation fees. FITS: AUDI A3 8P AUDI S3 8P AUDI TT 8J SEAT LEON MK2 1P SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z VW CADDY MK3 VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW JETTA 1K VW PASSAT B6 VW SCIROCCO VAT: - VAT is charged at the current rate of 20% to customers within the European Union Community. BREXIT 2021 EUROPEAN TAXATION CHANGES: For European Customers prices now displayed in cart once you enter your address will have 20% UK VAT Tax removed, however you will have to pay some form of Duties / VAT prior to delivery of your goods. If you are unsure of charges we recommend you should contact your local authorities ahead of placing your order. DISPATCH AND DELIVERY: - Our week day cut off time for same day dispatch on stocked items is 13:00 (GMT/BST). - If you need an item quickly, please contact us by phone on 0044 (0) 161 804 9888 prior to placing the order online to ensure that the item(s) you require is in stock ready to ship, - If you have ordered later than 13:00 (GMT/BST) and are looking for a same day dispatch, this can sometimes be accommodated, but please contact us first so that we can put things in place to achieve this for you. STOCK: - Our website does not display any information regarding an items stock level. Whilst we try to keep plenty of stock of our most popular items, it is not always possible for us to keep one of every option of every product on the shelf ready to ship. - If you need an order by a certain day/date, we strongly recommend you contact a member of our sales team to check the availability of the item(s) you require. - If you are planning to have your items fitted professionally, please wait until you have received and checked your goods before making any workshop or garage appointments.

Read more less

Type of Application:DS2500 - Off Road Use'Track Day' - Front and Rear of vehicle'Rally' - Rear of vehicle'Circuit Sprint' - Rear of vehicle'Formula' - Front and Rear of vehicle DS3000 - Off Road Use'Rally' - Front and Rear of vehicle'Circuit Sprint' - Front of vehicle'Formula' - Front and Rear of vehicle As a general guide we recommend that you consider the following when making your material compound selection: 4WD cars = same compound front and rear Rear traction cars = same compound front and rear. Front traction cars = high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003). For further advice please contact us. DS2500 (H)Track day & light race use for all vehicle types.Road style refinement but with race material ability to withstand heat with respect to life and μ.Average friction coefficient of 0.42 over working temperature range of 20°C to 500°C. DS3000 (R)Heavy duty all-round material choice.Multiple applications - touring car, rally, single seat.Average friction coefficient of 0.48 over working temperature range of 200°C to 650°C. FITS: AUDI A3 8P AUDI S3 8P AUDI TT 8J SEAT LEON MK2 SEAT TOLEDO 5P SKODA OCTAVIA MK2 VW CADDY MK3 VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW JETTA 1K VW PASSAT B6 VW SCIROCCO

Read more less

To suit disc size 345mm   This compound has been designed specifically for road use. It combines many of the characteristics found in a pure racing material (high friction, absence of fade) but has improved cold performance, and reduced disc wear and noise.The key features of DS Performance are:High friction coefficient (0.46 average)Excellent disc lifeLow wheel dustRacing "feel"Low heat transmission to caliper - thus avoiding fluid boilDS Performance is recommended for road use only. R90 compliant (EU standard for road pads). FITS: AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TT 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

to suit disc size: 288/312mm This compound has been designed specifically for road use. It combines many of the characteristics found in a pure racing material (high friction, absence of fade) but has improved cold performance, and reduced disc wear and noise.The key features of DS Performance are:High friction coefficient (0.46 average)Excellent disc lifeLow wheel dustRacing "feel"Low heat transmission to caliper - thus avoiding fluid boilDS Performance is recommended for road use only. R90 compliant (EU standard for road pads). FITS: AUDI A1 8XAUDI S1 8XAUDI A3 8PSEAT IBIZA MK4 6JSEAT LEON MK2SKODA FABIA MK1 6YSKODA OCTAVIA MK1VW CADDY MK3VW GOLF MK5VW POLO MK5 6R/6C

Read more less

This disc installation kit comes with everything you need to install our 1 piece 350x32mm front brake discs. Excluding calipers & pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 1 piece brake discs are 350x32mm from a different vehicle manufacturer which we have modified to allow fitment to your car. We machine the discs to offer them in either Hooked, Grooved or Dimpled. We also include hub centering rings which reduce the larger center bore of these discs to match VAG hubs to ensure correct fitment. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 350x32 1 piece front brake discs2x Disc mounting screws2x Centre bore reducing rings1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Porsche 996TT Calipers (Part #s 996.351.429 & 996.351.430)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

Our disc installation kits come with everything you need to install a our 2 piece 362x32mm set up using TTRS/RS3 8P 4 Piston Brembo Calipers. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers2x 362x32 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Audi TTRS/RS3 4 Piston Calipers1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing Weight Per Disc:8.6kg FITS: AUDI A3 8PAUDI S3 8PAUDI A3 8VAUDI S3 8VAUDI TT 8JSEAT LEON MK2 1PSEAT LEON MK3 5FSEAT TOLEDO 5PSKODA OCTAVIA MK2 1ZSKODA OCTAVIA MK3 5EVW CADDY MK3 2KVW EOS 1FVW GOLF MK5VW GOLF MK6VW GOLF MK7VW JETTA 1KVW PASSAT B6VW PASSAT CCVW SCIROCCO

Read more less

Our disc installation kits come with everything you need to install a big brake kit excluding the calipers and pads, allowing you the quality of Vagbremtechnic products with the option to source and supply your own 'bargin' priced new or second-hand  8 Piston Brembo Calipers which can be found from the Audi RS4 B7 / Audi R8 / Lamborghini Gallardo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit: 2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved or Drilled)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x 8 Piston Brembo caliper from Audi RS4 B7 / Audi R8 / Lamborghini Gallardo1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS:  AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TTRS 8J AUDI TT 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

If you’ve ever wanted to know what it feels like to drive a dedicated race car or experience how a VW Cup Car BTCC Car stops then you’ve come a step closer with VAGBREMTECHNIC. You may have a Stage 1 or Stage 2 car, which is used mainly on the road, or you may perhaps have a ring trip booked so you either don’t wish to buy or don’t feel the requirement for a full on Big Brake Kit. For those in this situation, we’ve developed the track day light kit. It comprises our own commissioned VBT Hooked 340mm discs, a set of Project Mu Racing H16 Compound brake pads and some Braided Lines. The discs are plug and play for all 340/345mm (TT/Mk5/6 Golf & Scirocco R & S3) applications and have temperature sensing paint applied for the monitoring of peak temperatures. Theyre lighter too than stock S3/R32/6R by approximately 1.9 kg (16%) and have a larger airgap for better breathing. The VBT Hooked design discs offer a quieter operation than a straight grooved disc and in addition provide improved bite and better debris clearance whilst offering an excellent gas path The Project Mu racing compound supplied is a homologated BTCC Qualifying pad that operates from relatively low temperatures (they’re also very popular in time attack) and have a friction coefficient of almost twice that of popular pads such as DS2500. See the graph for how these pads perform they’re simply incredible The supplied hydraulic lines are our own exclusive design and delete the additional join and feature a stainless banjo bolt for a more reliable and enduring installation #stopturquoise Please note this kit is intended for use on track, if the vehicle is used as a daily car and track car we highly recommend a set of street pads for use when on the road.  FITS: AUDI A3 8P AUDI S3 8P AUDI TT 8J SEAT LEON MK2 VW GOLF MK5 VW GOLF MK6 VW SCIROCCO

Read more less

This AP Racing caliper is made from forged aluminium and is a great alternative to the Radical 2 caliper as it will fit under most motorsport derived 18inch wheels. (PLEASE CHECK FITMENT/MEASUREMENTS BEFORE PURCHASING) The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black or red with the AP Racing logo but we can offer these calipers in almost any colour with or without almost any logo. The caliper carriers are made from highest grade, lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in a grooved pattern. Matched with our lightweight aluminium bells which are optimized for strength and cooling whilst retaining the benefit of being light weight with a black, hard anodised finish, This brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 bolts coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts 1x Set of Ferodo DS2500 brake pads To complete this front brake kit you will need:Brake fluid to flush system when installing FITTING: AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TT 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JTTA 1B VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less