The ultimate "CAIS" Fiesta ST MK8 Induction kit is here!! PRE ORDER FOR FEBRUARY DELIVERY If your going to upgrade your Fiesta ST MK8 Air Intake do it properly. All to often we find the cheap induction kits used on the Fiesta ST MK8 is not only sapping power but are not secured and therefore move around under acceleration. In comes the VUDU Fiesta ST MK8 induction kit to take the lime light with its show stopping features found below. KEY FEATURES   Built in and trade market "RAM FEED" Cold Air Elbow Free Flow Cotton pro air filter with *lifetime guarantee* VUDU Etched billet machined securing bracket Heat resistant powder coated heat reduction shield for ultimate heat dissipation Retained rubber bobbins for secure fitment in place of nut and bolt   We specifically designed this fiesta induction kit with our "RAM FEED" cold air elbow to further feed the induction air filter ensuring amazingly low IAT intake air temperature and consistent power figures. Further to this we decided the correct thing to do was manufacture a billet machined bracket to secure the filter in situation and laser etched with our prestigious VUDU logo. Our Sales Director Nick Cook decided the very best way to test this Fiesta ST induction kit was to take the car over to the Nürburgring and push it to its limits. We also where met with extreme heat which made the test even more interesting.     We are confident this Fiesta ST Induction kit not only provides amazing value for money but outstanding performance and aesthetic looks for your MK8 ST couple this with the amazing audible noise from this air intake and its a clear No1 choice.

Read more less

The Ultimate Fiesta ST MK8 Upgrade!! If you haven't changed the engine mount on your Fiesta ST MK8 you're running on borrowed time, especially if you have done power upgrades such as a stage 1 remap. We learned a lot from the Fiesta ST180 with our VUDU rear motor mount/roll mount improving grip and massively reducing wheel hop we already knew a rear mount for the Fiesta ST MK8 was going to be compulsory. Naturally this compliments the Fiesta ST MK8's amazing chassis and with our Fiesta MK8 Remap this mount makes for an amazing drive. KEY FEATURES:- T6061 Aerospace grade aluminium body VUDU Specific sure hardness bushes to ensure longevity Stainless steel torque plate and connecting pin 12 Month manufacturer guarantee Testing the VUDU way!! check out the blog to read how we tested the VUDU Fiesta ST MK8 engine mount at the prestigious Nürburgring along with over 10k road miles.  Please note: due to the nature of Torque Mounts, the bushes can be compromised by incorrect fitment etc. Due to this there is a zero tolerance return policy on all torque mounts, By purchasing you agree to this.This includes items that are claimed to be unused!

Read more less

The VUDU Boot Mats for the Ford Fiesta MK7 and MK8 are here!! IN STOCK NOW!! The Car Boot Mats for the Fiesta MK7 and MK8 are the latest addition to the long listed VUDU accessories range. Here at AET Motorsport, we've pushed the boat out and designed our range of boot mats that will that your car from an everyday vehicle to a hot hatchback. Please select either MK7 or MK8 from the drop-down menu to ensure the correct product.

Read more less

The new VUDU Battery Tie down for the Fiesta ST180 and the ST MK8 is a little bit of style that that will enhance the visual aesthetics of your engine bay.Designed as a direct replacement for the OEM battery tie down.Made using billet aluminium and laser etched with the trademark VUDU the Battery tie down with its sleek design is rigid enough to keep your battery in place with the bonus of giving your engine bay added beauty.  

Read more less

The New VUDU Car Badge Decal is here!! Beauty is in the detail. Show your Support for the VUDU movement with the VUDU Enamel Badge. Other badge decals are made from gel compounds that are prone to decaying due to weathering. These VUDU Badges are made using protective enamel. This provides the badge with extra protection against weathering. 

Read more less

VUDU vent pod for the fiesta st mk8  For those who already have a boost gauge kit for the fiesta st mk 8 are now able to mount it in the air vent using this vent pod made in house at AET Motorsport. 3d printed from a carbon infused filament ensuring ultimate rigidity and enabling air flow so the vent is not rendered useless. Key features:-   Impact resistant 20% carbon infused filament high heat resistant to ensure rigidity  Functional and aesthetically pleasing upgrade.   The VUDU vent pod is a must have upgrade for all fiesta st owners after such great success with our fiesta st180 vent pod this had to be a product made with the prestigious VUDU brand.

Read more less

**PRE ORDER FOR DELIVERY BEFORE XMAS** Introducing a world first for the Fiesta ST MK8 the Fiesta ST180- the VUDU subframe alignment kit. After checking the subframe alignment to the body when removing the front subframe bolts on our very own Fiesta ST MK8 and fiesta st180 demo car, we were astonished at how far adrift the subframe was sitting in comparison to the body. In come the VUDU engineers to develop a top hat locator for both the main subframe and front subframe bolts on our fiesta ST MK8 with amazing results. This is an absolute must for any serious owner. WHY DOES IT MATTER?? Simple- ask any race team how important a square chassis to subframe set up is prior to making adjustments to toe, camber and caster. Essentially, left without this kit your alignment is set up wrong to compensate for a non square chassis. Treat your Fiesta ST MK8 to the perfect first mod before starting  your tuning journey   KEY FEATURES:- AREO SPACE T6061 Billet Machined aluminium Top hat design to ensure perfect location  Hard anodised for durability  Laser Etch VUDU branding ** Please note 4 wheel alignment will be compulsory with this product**   This VUDU product is of the highest quality (as expected) and will transform the feel of your Fiesta ST MK8 or Fiesta st180.

Read more less

VUDU Performance Hot Side Boost Pipe for Fiesta ST MK8.  **USING THE DROP-DOWN MENU ABOVE SELECT IF YOU WOULD LIKE FITTING OR NOT.** Watch VUDU Performance smash it out of the park again with this Hot Side Boost Pipe for the MK8 Fiesta ST! The latest VUDU UK product for the Ford Fiesta ST will give your hot hatch that breathing capability it requires. This pipe has been designed as a direct replacement for the restrictive OEM pipe to increase the airflow. The VUDU Hot Side Pipe produces a smoother flow of air by replacing the restrictive bends and small diameter with the much larger 2.5" pipework of the VUDU pipe. Why upgrade your Boost Pipes? The Fiesta ST has suffered from suffocation and superheating intake air to the intercooler due to its small diameter pipework. This hot-side pipe allows the air to flow much smoother due to its large aluminum-grade pipework. The stock pipes are made from rubber and constrict when under increased pressure and heat. This is why VUDU UK constructed this pipe from lightweight, sturdy aluminum. If you're looking to turn your fast ford into a rally car for the road then this should be one of the first stops you make on your tuning journey. After seeing how successful and popular the Big Boost Pipe Kit was for the MK7 ST it made sense to design a counterpart for the MK8 ST. Developed using our MK8 Fiesta ST demo car to ensure this product matches the high standard we set for all our hardware.   Key Features: Increase in airflow. Larger pipe diameter. Improved turbo noise. VUDU Deep Laser etching.   This Hot-Side Pipe works perfectly alongside the VUDU Performance Stage 3 Intercooler. The combination of these two powerhouses will give you the boost in power you are looking for! This Boost pipe is for the Hot side only and not the cold side.

Read more less

VUDU Performance Oil Catch Can Kit for MK8 Fiesta ST. **USING THE DROP-DOWN MENU ABOVE, SELECT IF YOU WOULD LIKE FITTING OR NOT.** VUDU Performance does not play for second best, as evident with their latest unique creation, the new MK8 Fiesta ST Oil Catch Can. Constructed from Aerospace T6 quality billet aluminium, and finished with the prestigious VUDU logo, this is one upgrade that looks as stunning as it performs. Protect the longevity of your 1.5l EcoBoost engine and look good doing it. The Fiesta ST MK8 Catch Can is an essential first upgrade to ensure the health of your direct injection engine. The VUDU Oil Catch Can prevent the build-up of carbon on the intake manifold valves by collecting oil and moisture through the vacuum system. What makes the VUDU Catch Can Unique? Despite its stunning billet aluminium looks, the VUDU Catch Can have a unique edge over other catch cans such as the Mishimoto oil catch can fiesta st, and the AIRTEC catch can, which is its hoses. VUDU Performance has worked closely with the Ford manufacturers to design the oil-resistant, plastic nylon hoses, that directly clip to the OE fitment, which creates a non-leak, permanent seal. Other catch cans use a hose that slides onto the connectors and uses jubilee clips to keep it in place. MK8 Fiesta ST Oil Catch Can Worth it? Ford's range of EcoBoost engines is among a long line of direct injection engines (the injector is under high pressure and fires fuel directly into the cylinder) that inherently suffer from valve choking due to the oil build up around the cylinder head and valves. Couple this with the increased oil mist passing through the intake and cooling system of your Ford Fiesta ST180 leaves unnecessary build-up within the pipework, intercooler, turbo and inlet manifold. The VUDU Oil Catch Can Kit is without a doubt a MUST HAVE item to prevent any of these unnecessary problems from occurring.   KEY FEATURES: Aerospace T6 Billet aluminium construction The adapter has an Allen key socket head that prevents spanner rashing Unique plastic nylon hoses designed with OE clips for a permanent seal Prevents carbon build-up on intake valves Finished with the prestigious VUDU Logo Improved engine bay aesthetics

Read more less