The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.0 Fiesta Mk8 ST-Line.Expect to see gains of 5-10bhp compared to the original Airbox.Please note: This kit is designed to fit the pre 2020 model that has the turbo at the front. for the 2020-onwards 1.0 EcoBoost model with the turbo at the rear please see:  INDUCTION KIT FOR FIESTA MK8 1.0 & ST-LINE (REAR TURBO 2020 ONWARDS) Enhanced induction sound, great looks and loud recirculation dump valve noise on let off.Features: Removes ugly original plastic & restrictive airboxAdds power and torquemore responsive and exciting driving experienceEnhanced induction sound and turbo recirculation noise (dump valve ‘psssh’)free flowing Airfilter & optional k&n dry charger filter coverCNC maf sensor bossPowder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filterCold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photoAdds style to your engine bayEasy fitting, takes less than 15-20 minutes to install It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes (warranty)A simple modification that transforms the look of your engine bay. Please note: Bolt needs cutting if fitting optional silicone hose. Registered Design Right number 6023921 AIRTEC part no: ATIKFO17

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.5 ST 200 Mk8 Fiesta. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Add a pro Silicone Hose - Price includes hose clamps Features: Removes ugly original plastic & restrictive airbox Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay.   Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!   

Read more less

Description The Fully Redesigned Enhanced Performance Intake system that works perfectly with the standard or modified Fiesta MK8 ST & MK8.5Expect to see gains of 5-10bhp compared to the original Airbox.#Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. And starts from only £150!! Easy fitting, takes less than 15-20 minutes to install Enhancing both sound, Looks AND Performance this kit is a must have for all enthusiasts starting their modified Journey, Complete with a lifetime Guarantee Get your car ready for stage 2 and beyond! Features - CEUK “EP” Logo In Chrome - Removes ugly original plastic & restrictive airbox - Adds power and torque - more responsive and exciting driving experience - #Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') Choice of Air Filter Whats included: 1x CEUK #Enhanced Filter Cage 1x Sensor Housing Tube 1x High Flowing Cotton Air Filter 1x Fitting Kit! Video: Guarantee Lifetime Warranty and Guarantee on all Enhanced Intake Systems

Read more less

These filters are made using a high quality, high flow, synthetic nanofiber filtration media which is pleated to maximise surface area and in turn increase air flow. Utilising over 35 years of experience in the field of motorsport filtration the PRORAM range by Ramair is the premium choice on the market today for your fast road or track car. Neck Inside Diameter (A):70mm Overall Width (B): 150mm Overall Length: 185mm Component Dimensions Base Width: 150mm Base Length: 37mm Filter Top Width (D): 120mm Filter Base Width: 150mm Filter Length (C): 148mm Item Specifics Base Material: Rubber Polymer Base Finish: Gloss Base Colour: Black Filter Material: Synthetic Filter Reinforcement: Black Wire Mesh If 70mm Filters are sold out, you may receive a 90mm Inlet filter with a 70mm reducer ring! TECHNICAL SPECS Neck Internal Diameter 70mm EAN 5056185609656

Read more less

This full air box replacement induction kit is designed specifically for the Ford Fiesta ST MK8 1.5 Ecoboost. This kit allows for increase in airflow and induction noise over the factory intake equipment. The heat shield replaces the factory air box and mounts to standard OEM mounting points, it also replaces the standard intake hose. Whilst an ECU remap is not required, it will help you make the most of the increased potential airflow.

Read more less

REVO OPEN CONE AIR INTAKE SYSTEM FORD FIESTA ST MK8 1.5 ECOBOOST The Revo open cone Air Intake System for the 1.5 EcoBoost engine improves performance and offers an aggressive intake sound. Ensuring your engine can get access to enough air is paramount when increasing power; more air means more power throughout the rev-range. Only Revo Air Intake Systems are specifically designed to work in harmony with your vehicle and Revo ECU Software. Engineered to directly replace the stock airbox, pipework and filter, this kit comes complete with a front silicone hose, aluminium pipe, heat shield, filter, turbo inlet silicone and fitting kit. KEY FEATURES Increased Performance & Air Flow Efficiency Three Stage Foam Filter Direct filter to turbo fitment Stepped Silicone for smooth airflow   OEM VS REVO When you begin to enhance performance, the restrictive OEM intake struggles to flow enough air, robbing the engine of power. The Revo Air Intake System removes these restrictive elements promoting smoother airflow. Open Cone systems replace the OEM air box to make space for the heat shield, filter and pipework which joins directly to the turbo. Revo Flush Fit silicone hoses avoid unwanted turbulence at joins and increase the rate at which air can flow ensuring maximum performance at any level of tuning. CROSS OVER PIPE The Revo engineering team knew that to create the most effective kit, every component had to be considered to maximise and smooth airspeed. The system is designed around the single-piece aluminium cross over pipe, mandrel-bent to maintain the internal diameter in the corner and to remove the restrictions found in the OEM pipe. The direct routing and increased diameter pipe offer superior flow and deliver more air to the turbocharger over a shorter period.   SILICONE HOSES The plastic hoses on the stock system are designed with a corrugated style to flex with the engine movement, while this has its place it also causes a large amount of turbulence as the airflow doesn’t have a smooth direct path to the turbo. We designed the silicone hoses with stepped internals to ensure a flush fit and to minimise turbulence while still allowing for engine movement. The turbo inlet hose has an increased inner diameter that gradually tapers from the hard pipe to turbo to optimise airflow.   AIR FILTER An intake system is only as good as the filter. This kit comes complete with a custom Revo foam filter, supported by galvanised epoxy-coated mesh for strength under load. Revo three-stage foam filters work very differently to conventional paper or cotton-gauze alternatives designed to trap particles on the outer layer. Revo filters trap debris and particles within the foam layers, allowing air to still navigate through. The spun base of the filter offers a smooth radius aluminium bell mouth, specifically designed for optimum airflow from the filter to pipe-work.   HEATSHIELD Ensuring the engine has access to cold air is vital for performance. The Revo heat shield channels cold air from the front intake duct while partitioning the filter from the heat of the engine bay. The Revo Heatshield uses the stock mounting points to provide easy and secure installation. MOUNTING BRACKET AND FITTING KIT The Revo kits come complete with a full fitting kit that allows for easy installation. Included is a fully machined crossover bracket which increases the strength of this fixture point and alleviates any possibility of bracket failure from engine movement. RESEARCH AND DEVELOPMENT All Revo products are designed in-house and are rigorously tested utilising an in-house 3D printer, latest CAD and CFD programs, hub dyno and Revo data acquisition software. The Revo intake allows the turbo to run more efficiently, intake a larger volume of air and minimise turbulence to increase both power and torque, as highlighted during controlled dyno testing. The Revo Fiesta Mk8 open cone air intake system was tested in-house to compare the performance against that of the Ford OEM intake. First tested on a vehicle running the OEM intake with Revo Stage 1 software, Revo Intercooler and a Milltek GPF back exhaust, the Revo intake was then installed and tested in the same controlled environment to highlight the benefits of enhanced cooling. PERFORMANCE DATA The results show improvement throughout the whole rev range, but especially towards the top end of the rev range. The Revo intake offering an average gain of +7WHP, and +11NM torque over the stock part. Increased airflow also delivers impressive peak performance gains of +14WHP @6200rpm and +19NM @5100RPM over the stock intake system. AIRFLOW More air, less restriction. The Revo system was tested on a flow bench to highlight the kits efficiency in allowing more air to reach the turbo, quickly and with less restriction. The OEM system reached its maximum potential of 490 cubic feet per minute with a restriction of 1082 mmWg, compared to the Revo system which was able to flow 700 CFM with a restriction of only 965 mmWg. This difference allows the engine to still make power at the top of the rev limit, whilst also highlighting the efficiency and less restriction at the lower end, resulting in smoother and increased throttle response.     FITMENT VEHICLE APPLICATIONS Manufacturer Model Engine Year Ford Fiesta ST 1.5 EcoBoost 2018 onwards DOCUMENTS The following documents are available to view: FITTING INSTRUCTIONS Download the Revo Ford Fiesta MK8 ST Open Cone Intake System Instructions NOTES Simple replacement of the OEM part

Read more less

"Its so good we put our name on it" Giving you the brand new Enhanced Pro Filter - Made by ProRam exclusively for CEUK (RamAir) The filter itself has a 90mm Inlet, and comes with 4x Reducer Rings allowing it to be installed to an 85mm, 80mm, 75mm and 70mm inlet also! A metal end cap allows for our EP Logo & the iconic CEUK logo to be laser engraved, whilst durable rubber polymer is used at the base to provide strength! Reinforced wire mesh holds this synthetic black cotton piece together with the grab bar featuring the iconic ProRam Logo.  The perfect replacement filter for your air intake kit! Neck Inside Diameter (A): 90mm Overall Width (B): 150mm Overall Length: 165mm

Read more less

K&N Cleaning Kit Aerosol 99-5000EU K&N Power Kleen works to dissolve the dirt build up and old filter oil, and can be washed away with water. This Recharger Kit comes with a 204 milliliter aerosol spray can of oil and a 355 milliliter K&N pump bottle of Power Kleen air filter cleaner.99-5000EU will restore air flow efficiency and will bring your K&N oiled cotton air filter to like new condition   Can be used on both Foam & Cotton / Pleated  Labeled in English, Spanish, Swedish, Polish and Czech Restores filter to like new condition Removes road grime, engine exhaust and grease from K&N filters The only cleaner designed specifically for K&N cotton filters

Read more less

As seen on the Fiesta ST - this will fit all models and replaces the single air feed food on the NON st models Genuine Ford Dual Air Feed As Fitted to the New Fiesta ST 1.5T EcoBoost Direct fit to 1.0 Mk8 Ecoboost Fiesta   The Fiesta Mk8 1.0 Ecoboost is fitted with a single cold air intake tube and quite restrictive when adding power. This will restrict the amount of air able to be passed to the air filter assembly and subsequently to the engine and turbo lowering any potential power output. The Mk8 ST comes with a very similar setup but with dual feeds which is a direct fit onto the 1.0 increasing that much needed Cold Air Flow. Will not fit standard 1.0 airbox - requires intake kit to be fitted.

Read more less

NOW IN STOCK The all new Stage 3 ready Crossover Pipe from our sister company Enhanced Performance is here! Improving performance and offering an aggressive intake sound we have ensured that the maximum amount of airflow is delivered as quickly as possible to where its needed! What's in the Kit? 1x Enhanced Performance Crossover Pipe 1x Turbo to Crossover couple silicone 2x Jubilee Clips Technical Info: Each component has been designed to maximise airflow giving a speedy delivery to the turbo, Our free flowing pipe is 25% larger in internal diameter than the oem counterpart, and removes the bend in the middle section which has been known to create turbulence! Overall a wider smoother route for air to pass giving more power! Will fit with any other brand of silicone / primary hose including RamAir & Pro Alloy

Read more less

Enhanced Performance MK8 Fiesta ST Primary Intake Hose Replaces the OEM Restrictive plastic hose connecting the airbox to the crossover pipe. Smooth, Large bore internals allow for increased throttle response, maximum performance and a great sound when coupled with a CEUK Induction Kit! Available in 12 colours and featuring the CEUK logo!

Read more less

EVERYTHING YOU NEEDFOR THE POWER YOU CRAVE PLEASE NOTE: SOFTWARE HAS TO BE INSTALLED BY DEALER! Enhanced power delivery, unique safety features and exhilarating response at your disposal, the Revo Performance Pack delivers much more than peak power figures. Whatever drives you, the Revo Performance Pack has it all. Engineered to perform, only Revo offers a complete tuning solution specifically designed for your vehicle. AIR INTAKE SYSTEM PERFORMANCESOFTWARE INTERCOOLER PIPE UPGRADE KIT INTERCOOLER     OPEN CONEAIR INTAKE SYSTEM Revo Open Cone Systems completely replace the OEM air intake for those who like to announce their vehicle is far from standard. Along with an aggressive intake sound, more air means access to more power throughout the rev-range. IncreasedDiameter DirectFlow PerformanceDesigned Learn more about this product PERFORMANCE ECU SOFTWARE Revo performance Software is designed to safely enhance the driveability of your vehicle, giving access to more power and torque throughout the rev range while maintaining the extensive factory safety mechanisms. Revo Software offers a perfect balance of performance, economy, longevity, and safety so you can drive harder, for longer. OBDII PortInstalled Vehicle HealthCheck Authorised DealerSet-up Read More     INTERCOOLER PIPE UPGRADE The Revo Intercooler Pipe Upgrade kit comes as part of the Revo Intercooler. It reduces charge system resistance and improves flow over the restrictive stock pipework. Featuring fewer restrictions for smoother airflow, and optimised routing, the turbo meets less resistance and can perform more effectively. DirectReplacement IncreasedDiameter DirectInternals Learn more about this product INTERCOOLER UPGRADE The Revo Intercooler was built around a simple principle; create a cooler that can keep up with your demand for power. Unique design features lower intake air temperatures, minimise pressure drop and allow the engine to produce impressive power and torque with Revo Software, ensuring you get consistent performance when you need it most. DirectReplacement UniqueFin Design MinimisedPressure Drop Learn more about this product     STOCK POWER200PS TORQUE290NM POWER262PS TORQUE395NM Find your nearest Revo Authorised Dealer Manufacturer Model Variant Engine Year Ford Fiesta Mk8 ST 1.5 EcoBoost 2017 > Images shown are for illustration purposes only All Revo Software availability is ECU ID Dependant. Upgrade pricing for existing Revo Stage 1 ECU customers.  Terms and Conditions apply.  Performance data is taken from 2018 Fiesta ST Mk8. Additional SPS Software Switch purchase required for some software features.  Pricing does not include the installation of parts, please contact your local Revo Authorised Dealer

Read more less