Performance - Cupra Ateca

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

VBT Cross Drilled 340x30mm Front Brake Discs   The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc.   Highly durable anticorrosion coating that protects all product surfaces (internal and external)Extended service life due to improved anticorrosion durabilityPerformance pattern allowing greater cooling of braking surfaceImproved visual appearanceThe price is for 1 pair of discs FITS: AUDI A3 8V AUDI S3 8V AUDI TT 8S CUPRA ATECA CUPRA FORMENTOR CUPRA LEON SPORTSTOURER CUPRA LEON SEAT LEON MK3 5F SKODA OCTAVIA MK3 5E GOLF MK7 GOLF MK8

Read more less

VBT Cross Drilled 310x22mm Rear Brake Discs The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance The price is for 1 pair of discs FITS: AUDI RS3 8V AUDI A3 8P AUDI A3 8V AUDI S3 8P AUDI S3 8V AUDI TT 8S AUDI TTRS 8S CUPRA ATECA CUPRA FORMENTOR CUPRA LEON SPORTSTOURER SEAT LEON MK3 5F SKODA OCTAVIA MK3 5E VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

We aim to fulfill your orders within 2-5 working days. Sometimes there can be a delay due to the items being individually made or a delay in parts, for which you will be notified.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Cupra Ateca (KH7) 2.0 TSI 4Drive 257KW/349HP 05.20-. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

We aim to fulfill your orders within 2-5 working days. Sometimes there can be a delay due to the items being individually made or a delay in parts, for which you will be notified.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Cupra Ateca (KH7) 2.0 TSI 4Drive 221KW/300HP 09.18-. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR652000

Read more less

Racingline Performance Stage 3 Brake Kit - 380mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 380mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please -- Contact UsNotes: - 380mm kit will fit under 19" Alloy Wheels- Factory 19" wheels and other brands may require spacers- Racingline and Neuspeed 19" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Performance Stage 3 Brake Kit - 355mm - MQB Cars The RacingLine Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.Our design vision was made possible by our advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight Forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing.Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 355mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. What's in the Kit? - Monoblock Front Brake Calipers (Pair)- Caliper Mounting Brackets (Pair)- Full Mounting Bolt Kit- Braided Steel Front Brake Line Set- Sport Brake Pad Set (Fast Road Use)- 355mm Fully Floating 2 Piece Brake Discs (Pair)If you are looking for replacement brake pad options for this brake kit, Please --> CLICK HERE!! <--Notes: - 355mm kit will fit under 18" Alloy Wheels- Factory 18" wheels and other brands may require spacers- Racingline and Neuspeed 18" wheels will not require Spacers- When using this kit on Track, it is important to remove the dust boots from the caliper pistons.

Read more less

Racingline Performance Stainless Steel Braided Brake Line Set The ideal first upgrade for your Stock Braking System Racingline Performance Stainless Steel Brake Lines are engineered to replace the standard brake lines with a harder wearing hose that is less prone to expansion under high temperatures.These will not only give a better pedal feel than the standard brake lines, but also last much longer. Compatible with all DOT4 and Performance Brake Fluids This Kit consists of:– 2x Front Brake Lines– 2x Rear Brake Lines– 8x Banjo Washers IMPORTANT NOTES:– YOU WILL NEED TO RE-USE THE EXISTING BANJO BOLTS– THE REAR HOSES ARE ONLY SUITABLE FOR VEHICLE WITH ELECTRONIC HANDBRAKE   Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR69G7KIT

Read more less