Performance - BMW 2 Series F22 / F23 / F45 / F46 All Models

Replaces BMW OEM Part 13718601684        The Forge free-flowing charge pipe kit will increase flow and improve the reliability of your B58 engine from BMW. These high-quality aluminium pipes are a direct replacement and will fit in place of the OEM plastic pipe. The OEM pipe can become brittle and fail under increased boost pressure, so we have developed a replacement with an increased diameter, which helps to reduce turbulence and maximize flow into the engine. Larger diameter giving increased flow compared to OEM CNC machined billet couplers Mandrel bent single piece aluminium pipework Minimal airflow disruption Integrated water/methanol port and blanking plug supplied All fitting hardware supplied The alloy hard pipes are powder coated to allow for a more durable hard wearing product The Forge silicone hose in this kit has been designed to include an high quality inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable for use with either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically. The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader Lifetime warranty* This product is designed, developed and manufactured entirely in Great Britain and is covered by our worldwide lifetime warranty. It is designed to fit a multitude of applications: BMW 1 Series - F20/F21 LCI 09/2015 - 08/2018BMW 2 Series - F22 09/2015 - 06/2017BMW 2 Series - F22 LCI 09/2016 - 08/2018BMW 2 Series - F23 09/2015 - 06/2017BMW 2 Series - F23 LCI 10/2016 - 08/2018BMW 3 Series - F30/F31 LCI 10/2014 - 09/2018BMW 3 Series - F34 GT LCI 09/2015 - 07/2017BMW 3 Series - F34 GT LCI 09/2015 - 07/2018BMW 4 Series - F32 04/2015 - 02/2017BMW 4 Series - F32 LCI 05/2016 - 08/2018 BMW 4 Series - F33 03/2015 - 02/2017BMW 4 Series - F33 LCI 05/2016 - 08/2018 BMW 4 Series - F36 Gran Coupé 03/2015 - 02/2017BMW 4 Series - F36 Gran Coupé LCI 05/2016 - 07/2018BMW 5 Series - G30 10/2015 - 08/2018BMW 5 Series - G31 03/2016 - 07/2018BMW 5 Series - G38 02/2016 - 08/2018BMW 6 Series - G32 GT 09/2016 - 07/2018BMW 7 Series - G11 10/2014 - 07/2018BMW 7 Series - G12 10/2014 - 08/2018BMW X3 - G01 10/2016 - 09/2018BMW X4 - G02 03/2017 - 08/2018     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This adaptor plate is installed between the boost (MAP) sensor and its mounting Boss. This allows for a takeoff to run a vacuum operated valve or for connection to a boost gauge, without having to cut into any original equipment.  Vacuum hose, cable ties, and fitting instructions are supplied and the installation is fully reversible.   Compatible with the following BMW MAP sensors:  13627551429  13627585493  13627599042 BMW Compatible Vehicles:1' F20  (07/2010 — 02/2015)1' F20 LCI (05/2014 — 06/2016)1' F21 (07/2010 — 02/2015)1' F21 LCI (09/2014 — 06/2016)2' F22 (10/2012 — 06/2016)2' F87 M2 LCI (10/2016 — 12/2018)2' F23 (04/2014 — 06/2016)3' F30 (02/2011 — 01/2016)3' F30 LCI (10/2014 — 10/2018)3' F80 M3 (04/2012 — 06/2015)3' F80 M3 LCI (01/2015 — 10/2018)3' F31 (07/2011 — 06/2015)3' F31 LCI (12/2014 — 06/2016)3' F34 GT (07/2012 — 06/2016)3' F35 (06/2011 — 08/2015)3' F35 LCI (01/2015 — 08/2016)4' F32 (11/2012 — 01/2017)4' F82 M4 (02/2013 — 02/2017)4' F82 M4 LCI (05/2016 — 12/2018)4' F33 (03/2013 — 02/2017)4' F83 M4 (06/2013 — 02/2017)4' F83 M4 LCI (05/2016 — 12/2018)4' F36 Gran Coupé (07/2013 — 12/2016)5' F07 GT LCI (08/2012 — 02/2017)5' F10 (06/2010 — 10/2016)5' F10 LCI (10/2012 — 10/2016)5' F11 (06/2010 — 06/2013)5' F11 LCI (10/2012 — 02/2017)5' F18 (03/2011 — 08/2013)5' F18 LCI (10/2012 — 04/2017)5' F90 M5 (01/2016 — 12/2018)6' F06 Gran Coupé (10/2011 — 02/2015)6' F06 Gran Coupé LCI (09/2014 — 09/2018)6' F12 (03/2011 — 02/2015)6' F12 LCI (05/2014 — 05/2018)6' F13 (03/2011 — 02/2015)6' F13 LCI (06/2014 — 10/2017)X1 E84 (04/2009 — 12/2015)X3 F25 (02/2011 — 08/2017)X4 F26 (05/2013 — 03/2018)X5 F15 (10/2014 — 06/2018)X5 M F85 (04/2013 — 06/2018)X6 F16 (11/2014 — 12/2018)X6 M F86 (10/2013 — 12/2018)Z4 E89 (01/2011 — 08/2016)MS BMW Motorsport ( — ) In the Box: Small Forge Sticker3.5mm Black Vac PortCable ties (x10)4mm Vacuum Hose (x3m)Instructions QR Label   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This uprated intercooler has been designed for the  BMW vehicles with the N55 3.0 single turbo engine and N54 twin turbo engine, we have again managed to retain a very easy installation (taking less than 45 minutes with no need to remove the bumper), but also NO cutting of any bodywork. With our testing results indicating a temperature drop of 25 degrees centigrade, and of course the increase in power that you would expect from a much larger cooler charge, plus the ability to install this on your driveway at home, we have a truly excellent product. Vehicle Fitments F20, F21 Chassis 114d, 114i, 116d, 116i, 118i, 118d, 118dX,118i ,120d ,120dX, 125d, 125i, 135i,  F22,F23 Chassis 218d, 220d, 220i, 225d, 228i, 235i,  F30, F31, F34 Chassis 316d, 316i, 318d, 318dX, 320d, 320i, 320dX, 325d, 328i, 330d, 335d, 335i F32, F36 Chassis 420d, 420dX, 420i, 420iX, 418d, 420d, 420dX, 420,i 420iX, 425d, 428i, 430d, 435d, 435i After considerable trials with different intercoolers cores, we have again opted for a core of bar and plate design, and along with an overall increase in dimensions we have been able to drastically improve the cooling ability when compared to the factory intercooler. In the construction, we use CNC machined bayonet couplers which allow an easy plug and play install. The intercooler is supplied with easy to follow instructions. Our before and after Dyno runs (see images above) clearly show, not only the power increase, but the significant reduction in intake temperature. Forge designed and manufactured specifically for an engineered fit to your BMW Chassis.   Utilising a solid works designed high flow hand manufactured end tanks. High density bar & plate construction air core. A simple and easy direct bolt on to the OEM position. Includes all hardware needed to install.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Recirculation valve (quiet in operation) is for the BMW 235 3.0 Petrol Turbo engine, as found in the F22 chassis model that has a single electronically controlled bypass valve. This product is recommended for both unmodified vehicles and any vehicle where the boost pressure has been increased by an ECU software upgrade, as a replacement to the OEM bypass valve. Unfortunately the standard valve fails when the plastic deteriorates with age normally resulting in a check engine light. Unfortunately the valve may still partially function, so you may not be aware that you are losing power due to this. This particular failure can also result in the valve falling apart upon removal from the turbo, and in extreme cases, bits of plastic entering the turbo, resulting in serious damage. Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and with a body of all aluminium construction. It’s also fully serviceable and the spring strength can be changed to suit increased boost levels. Most importantly it still also retains the desirable OEM ECU control over valve actuation, with the inclusion of an electrical harness that plugs straight into the BMW wiring. It’s literally plug and play.   THIS IS ONLY AVAILABLE IN BLACK   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Designed as a direct replacement for the OEM plastic boost pipes used on BMW S55 engine found in the BMW F80 M3, F82 and F83 M4 models, which have been known to fail with cracks forming along the plastic welded section between the main tube and plastic coupler. Manufactured in 60mm diameter Aluminium tube with CNC machined couplers. To ensure an OEM quality fit both hardpipes have been carefully contoured to fit in the restricted space between the engine and chassis. No further modifications are necessary to the bodywork or pipework. Supplied with a durable black powdercoated finish. All fitting hardware supplied. Kit includes hardpipes and silicone hoses to allow fitment to OEM chargecooler or Forge chargecooler Compatible Vehicles: BMW M3 – 2015 onwards F80 M3 BMW M4 – 2015 onwards F82 M4 BMW M4 – 2015 onwards F83 M4   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

In addition to the Forge Motorsport PolarCooler range, here we have the top mount replacement chargecooler and expansion tank for the BMW MSport S55 Engine. The Chargecooler features an all aluminium construction which overcomes all the issues relating to plastic end tank splitting, failure at high boost and leaks between the core and end tanks with end tank seal failure. The end tanks are fabricated using high precision laser cut sheet metal panels which are TIG welded by hand for maximum strength and durability. Designed and manufactured at Forge Motorsport HQ in Gloucestershire, England, we utilised our Solidworks CAD design system to assist in the creation, modification, CFD (Computational Fluid Dynamics) analysis and optimization of this innovative charge cooler. Three different core constructions were evaluated during the development process. The final design of a bar and plate core far outperformed the other two alternatives. In doing this, the Forge Motorsport development engineers have made a quadruple pass design, allowing the water to flow through four passes of the cooler which improves the cooling efficiency beyond any other products currently on the market. Unique to the market, the Forge BMW M3/M4 S55 Chargecooler system (that also fits the M2 Competition F22 2018-) uses an expansion tank rather than a header tank like the OEM system. There is a filler cap located at the highest point on the Chargecooler allowing you to be sure that the charge is 100% full of coolant with no air pockets. This maximises the efficiency of the heat rejection of the coolant within the Chargecooler water jacket. Offering over 71% increase in volume and over 42% increase of frontal area. In hot climate testing, constant dyno runs showed significantly lower inlet temperatures compared with the stock system and an increase in power of up to 20BHP. As part of Forge Motorsport’s strict quality control process, each chargecooler unit is carefully inspected and pressure tested to 4BAR before despatch. Located on the outlet tank of the chargecooler there is also a 1/8 NPT port ready for water/methanol injection if required. The existing OEM Chargecooler rubber mounts are used for this expansion tank and Chargecooler, isolating the system from the harsh vibrations of the engine. No trimming or cutting of the vehicle is required and all parts can be returned to standard if necessary. In the box 1x Chargecooler unit1x Expansion tank with sight glass1x Expansion tank cap1x Small radiator cap1x Billet radiator cap cover1x Billet blanking cap1x 1/8 NPT Grub screw7x M6x12mm  Allen cap bolts7x 6mm washers1x M8x20mm Allen cap bolt1x 8mm washer1x M8 Nyloc nut3x 8-16mm Hose clamps1 x 8mm ID Vacuum hose x 170mm1x 8mm ID Vacuum hose x 750mm  Click here to find out about information and care for yourForge Motorsport cooling product.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This blow off valve, or dump valve is for the BMW 235 3.0 Petrol Turbo engine 2014+ are EWG (Electronic Waste Gate) as found in the F22 chassis model that has a single electronically controlled bypass valve. This product is recommended for both unmodified vehicles and any vehicle where the boost pressure has been increased by an ECU software upgrade, as a replacement to the OEM bypass valve. Unfortunately the standard valve fails when the plastic deteriorates with age normally resulting in a check engine light. Unfortunately the valve may still partially function, so you may not be aware that you are losing power due to this. This particular failure can also result in the valve falling apart upon removal from the turbo, and in extreme cases, bits of plastic entering the turbo, resulting in serious damage. Our alternative is a fully engineered solution offering significantly improved reliability. Our valve is piston based, with no diaphragm to fail, and with a body of all aluminium construction. It’s also fully serviceable and the spring strength can be changed to suit increased boost levels. Most importantly it still also retains the desirable OEM ECU control over valve actuation, with the inclusion of an electrical harness that plugs straight into the BMW wiring. It’s literally plug and play.   THIS ITEM IS ONLY AVAILABLE IN BLACK

Read more less