Performance - Audi S4 B8

Type of Application:DS2500 - Off Road Use'Track Day' - Front and Rear of vehicle'Rally' - Rear of vehicle'Circuit Sprint' - Rear of vehicle'Formula' - Front and Rear of vehicle DS3000 - Off Road Use'Rally' - Front and Rear of vehicle'Circuit Sprint' - Front of vehicle'Formula' - Front and Rear of vehicle As a general guide we recommend that you consider the following when making your material compound selection: 4WD cars = same compound front and rear Rear traction cars = same compound front and rear. Front traction cars = high friction level in the front axle (i.e. DS3000), lower friction level on the rear axle (i.e. DS2500, 4003). For further advice please contact us. DS2500 (H)Track day & light race use for all vehicle types.Road style refinement but with race material ability to withstand heat with respect to life and μ.Average friction coefficient of 0.42 over working temperature range of 20°C to 500°C. DS3000 (R)Heavy duty all-round material choice.Multiple applications - touring car, rally, single seat.Average friction coefficient of 0.48 over working temperature range of 200°C to 650°C.

Read more less

The calipers included in this kit are 6 Piston AP Racing Radicals. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. This kit comes with Ferodo DS2500 brake pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or hooked. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 390x34mm 2 piece front brake discs1x Braided front brake lines1x Set of Ferodo DS2500 Brake Pads4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:Brake fluid to flush system when installing fits:  AUDI RS5 8T AUDI A4 B8 AUDI A5 B8/B8.5 AUDI A6 C6 AUDI A6 C7 AUDI S4 B8 AUDI S5 B8/8.5 AUDI S6 C6 AUDI S5 C7

Read more less

This front brake adaption kit allows the fitment of Aston Martin DB9 Calipers to VAG stock 345mm brake discs (see below for required parts & part numbers).TTRS/RS3 Calipers can be used but the calipers will need 'reversing' (swapping bridge pipe & bleed nipples) The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 Stainless spring washers. Included in our kit:2x Caliper carriers1x Set of Stainless Steel Braided Front Brake Lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Aston Martin DB9 4 Piston Brembo Calipers (Part No's@ 4G43-2C463 & 4G43-2C462) -- OR -- TTRS/RS3 4 Piston Calipers (Part No’s: 8J0615107B / 8J0615108B) - If reversed2x 345mm front brake discs (Part No: 8K0615301M - Pagid Number 54602)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs FITS: AUDI A4 B8 AUDI A4 B9 AUDI A5 B8 / B8.5 AUDI A6 C7 AUDI S4 B8 AUDI S4 B9 AUDI S5 B8 / B8.5 AUDI S6 C7

Read more less

The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc. Highly durable anticorrosion coating that protects all product surfaces (internal and external) Extended service life due to improved anticorrosion durability Performance pattern allowing greater cooling of braking surface Improved visual appearance Discs priced as pairs    

Read more less

A great kit to improve the braking power and is a direct replacement for the stock calipers and carriers. Base Kit includes 2x Genuine Porsche Brembo Callipers and HEL Performance front braided lines. You can choose your choice of disc patterns and pads on the options list.   To complete this kit you will need discs and pads of your choice. IF YOU HAVE A GOLF 5/6/7 (PQ35/MQB) ETC PLEASE USE THE FOLLOWING KIT CLICK HERE

Read more less

As this kit will be made bespoke for you, please allow 10-15 working days for manufacture and testing of the kit, this can vary depending upon workload and current COVID restrictions.Please note, all kits are for European specification vehicles only. Please contact us if you require a kit of another specification. Goodridge Premium Performance Brake Lines for for Audi S4 Quattro B8 2009-2016. Superior to OEM brake lines, Goodridge Premium Performance Brake Lines feature a PTFE liner, wrapped in a stainless steel braided outer, ensuring that the line doesn’t expand under pressure. Effort exerted at the brake pedal is transferred directly to the calliper. Goodridge Premium Performance Brake Lines have been developed on the track, for use on the road. No expansion, firmer braking and increased confidence. Please note: All Goodridge Premium Performance brake line kits are supplied with copper crush washers where necessary.

Read more less

Pagid RS - Allround Racing Brake PadsRS14GT cars, Touring cars for club racing and track days.RS 14 features good allround characteristics for many applications. It is a low metallic resin bonded material containing steel and acrylic fibers. RS4-2Classic rally pad and also very popular in small formula and touring cars.RS 42 is a low metallic resin bonded material containing steel and acrylic fibers. The characteristics make this material appropriate for small formula cars. RS4-4Very good rear axle pad for all front engine cars. Very popular club racing compound.RS 44 works for formula cars all the way up to lighter passenger cars. It is a low metallic resin bonded material containing steel and acrylic fibers. The smooth progression of friction from cold to hot makes this material easy to work with. Pagid RSL - Endurance Brake PadsRSL1Used in GT cars, Touring cars and prototype endurance racing. Due to the high friction and good modulation, often used in sprint races as well.RSL 1 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level over a wide range of temperatures. Its low wear rate and disc friendliness makes this material appropriate for endurance races. RSL2GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics often also used in sprint races.RSL 2 is based on the RSL 1 compound but has been further improved in terms of pad and disc life as well as friction stability vs. temperature.It is a low metallic resin bonded material containing steel and acrylic fibers. Furthermore it maintains a constant friction level over a wide range of temperatures. RSL19Rear axle usage in combination with RSL 1 and RSL 2 on the front axle in heavier cars (GT3/GTE). Front axle usage for lighter GT and Touring cars.??????RSL 19 is a low metallic resin bonded material containing steel and acrylic fibers. It maintains a constant friction level across a broad range of temperatures. The material features very good modulation and release characteristic RSL29Very popular in club racing and track days. GT cars, Touring cars and prototype endurance racing. Due to excellent modulation characteristics also often used in sprint races.RSL 29 features very good modulation and release characteristics. It is a low metallic resin bonded material containing steel and acrylic fibers.The friction level of the material maintains constant at a low-medium level. Another advantage is the easy bedding in behavior. Pagid RST - Rally, Sprint and Stock Car Racing Brake PadsRST1Rally tarmac, GT cars and Touring cars circuit racing (sprint), high down-force formula cars, NASCAR. Suitable for applications in heavy cars and where high torque is necessary against small diameter rotors.RST 1 has a very high friction level and high temperature resistance. It is a semi metallic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST2Rally tarmac, GT cars and Touring cars circuit racing and NASCAR. Also used as rear pad in combination with RST 1 front. Recommended for GT and Touring Car racing on tracks where higher temperatures are an issue.RST 2 is a semi metalic resin bonded material containing steel and acrylic fibers. Cold friction and initial bite makes this material most appropriate for Rally and NASCAR applications. RST3Rally tarmac and gravel, GT cars, Touring cars and prototype circuit racing, formula cars and club racing. Wide range of applications due to it‘s combination of bite, friction and controllability.RST 3 is a medium-high friction metal- ceramic compound containing steel and acrylic fibers and is therefore the perfect complement of the RST product family. It captivates by its low heat conductivity. RST4Formula cars and open wheel racing. Rear axle material for Rally (tarmac and gravel) and for all front engine cars. Also used in NASCAR on long ovals.RST 4 is a semi metallic resin bonded material containing steel and acrylic fibers. This material has a medium friction level and high temperature resistance. RST5Specifically designed and developed for rally racing. Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.The RST 5 is tailor-made for the challenging requirements of rally sports. Due to its optimized thermal management, it provides ideal performance from low temperatures to extremely high temperature conditions. Thus, it has a great cold ramp-up behavior. Its ideal heat transfer guarantees that the generated heat stays in the brake pad and does not move into the brake fluid, making the RST 5 highly fluid fade resistant.The recovery properties of the material also provide assurance of a constantly ideal operating temperature. With its high initial bite and generally high friction level the RST 5 is a new rally material that perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance, even under the most demanding conditions. Pagid RSC - Racing Brake Pads for Ceramic Composite DiscsRSC1Race and track day compound for all known types of ceramic brake discs.RSC 1 is a low metallic resin bonded material containing steel and acrylic fibers. This material features good allround characteristics and is suitable for all types of usage. RSC2Special race compound for ceramic discs with a high content of fibers in the friction surface for sprint and endurance circuit racing.RSC 2 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications. RSC3Special race compound for ceramic discs with low content of fibers in the friction surface for sprint and endurance circuit racing.RSC 3 is a low metallic resin bonded material containing steel and acrylic fibers. This material is specifically developed for above mentioned applications.

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALIPERS Our lightweight six-pot caliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The caliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the calipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITMENT       Manufacturer Model Engine Year Audi A4 (B8) Various  2007 - 2015  Audi S4 (B8) 3.0 TFSI  2009 - 2015 Audi S5 (B8) Various  2007 - 2015 Audi Q5 Various  2008 - 2016 Audi SQ5 3.0 TFSI  2013 - 2016 Audi SQ5 3.0 TDI  2013 - 2016 Audi A5 (B8) Various  2007 - 2015   Notes: Recommended Revo Authorised Dealer Fitment only Please follow the bedding in procedure  Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALIPERS Our lightweight six-pot caliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The caliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the calipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITMENT       Manufacturer Model Engine Year Audi A4 (B8) Various  2007 - 2015  Audi S4 (B8) 3.0 TFSI  2009 - 2015 Audi S5 (B8) Various  2007 - 2015 Audi Q5 Various  2008 - 2016 Audi SQ5 3.0 TFSI  2013 - 2016 Audi SQ5 3.0 TDI  2013 - 2016 Audi A5 (B8) Various  2007 - 2015   Notes: Recommended Revo Authorised Dealer Fitment only Please follow the bedding in procedure  Please contact your local Revo Authorised Dealer for additional information and availability.

Read more less