Performance - Audi S3 8V No GPF

The ECS Heavy Duty Rear Shock Mount offers significant performance to your vehicle's handling and long term durability as compared to stock shock mounts. With the increased durometer over the squishy, foam, OEM 50A durometer shock mounts, the ECS void-free 75A durometer rubber shock mounts will better resist deflection and premature wear that commonly plague the OE mounts without sacrificing ride comfort. This is a must have if you are installing sport springs, coilovers or when replacing rear shocks. OEM shock mounts are known to wear within 100k miles, typically associated with annoying pops and rattles as the vehicle goes over bumps and uneven terrain. The ECS Heavy Duty Rear Shock Mounts are made to last, with their higher durometer over stock and precision to OE tolerances.   PART DESIGN 75A durometer solid rubber bushing assembled with precisely controlled preload for superior durability and resistance to axial forces which cause the OE units to fail OE style cast aluminum housing with a black E-Coat to ensure all surfaces are covered Quiet, long-lasting, dependable operation   The ECS Heavy Duty Rubber Rear Shock Mount Kit includes the following: ECS Heavy Duty Rubber Rear Shock Mounts - QTY 2 Shock Mount Dust Caps - QTY 2 Lower Shock Mounting Bolts - QTY 2 This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Arteon 4Motion 2.0T Evo4 Volkswagen Arteon 4Motion 2.0T Gen3 Volkswagen Arteon FWD 2.0T Evo4 Volkswagen Arteon FWD 2.0T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII R Facelift 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3 Volkswagen Jetta VII Sedan 1.4T Volkswagen Jetta VII GLI 2.0T Gen3 Volkswagen Jetta VII GLI Facelift 2.0T Gen3

Read more less

Are you installing new suspension on your vehicle? If so, don’t let them get the best of you, pick up this new ECS Complete Cup Kit/Coilover Install Kit and make the job easier than ever. This new kit includes two upper strut bearings, two Heavy Duty ECS upper front strut mounts, two ECS HD upper rear shock mounts and all the mounting hardware needed for installation. Getting this means no need to use a spring compressor to retrieve your old hardware to install your new suspension. On top of that, it also leaves your old suspension fully assembled so that it may be quickly swapped back onto the vehicle if needed, that way, you can take your coilovers with you when it comes time to sell your vehicle.   Kit includes : [FRONT] (2) ECS Heavy Duty Front Strut Mounts (2) Front Upper Strut Bearings (2) Front Upper Strut Nuts (6) Front Upper Strut mount Bolts (2) Front Axle Bolts (2) Front Strut Pinch Bolts (2) Front Strut Pinch Bolt Nuts (2) Front Sway Bar End Link Nuts (6) Ball Joint Nuts [REAR] (2) ECS Heavy Duty Rear Shock Mounts (2) Rear Shock Upper Mounting Nuts (2) Rear Shock Upper Mount Dust Caps (4) Rear Shock Upper Mounting Bolts (2) Rear Shock Lower Mounting Bolts (2) Rear Shock Lower Mounting Nuts (2) Rear Sway Bar End Link Mounting Bolts (2) Rear Sway Bar End Link Mounting Nuts This Part Fits the Following Vehicles Make Model Submodel Engine Audi 8V S3 Quattro 2.0T Audi A3 8V FWD 1.8T Audi A3 8V FWD 2.0T Audi A3 8V Quattro 2.0T Volkswagen Alltrack All 1.8T Gen3 Volkswagen Golf VII Hatchback 1.8T Gen3 Volkswagen Golf VII Sportwagen 1.8T Gen3 Volkswagen Golf VII Hatchback 2.0T Gen3 Volkswagen Golf VII All 2.0T Gen3 Volkswagen Golf VII Facelift FWD 1.4T Volkswagen Golf VII Facelift FWD 1.8T Gen3 Volkswagen Golf VII Facelift FWD 2.0T Gen3 Volkswagen Golf VII R 4Motion 2.0T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.4T Volkswagen Golf VII SportWagen Facelift 4Motion 1.8T Gen3 Volkswagen Golf VII SportWagen Facelift FWD 1.8T Gen3

Read more less

ECS GEOMETåâ premium brake discs for the MQB Platform vehicles using a 310x22mm Rear Brake disc from factory. ECS GEOMETåâ premium brake discs start with quality materials and precision ECS machining. That would be enough for most of us, but it is only the beginning. To prevent brake pad deposits for better braking, select a slotted ECS GEOMETåâ brake disc. Slotting cleans the pads by moving water, gasses, and contaminants away from the pad/disc contact surface. To prevent corrosiaon pitting and rust damage, ECS GEOMETåâ discs are sprayed with a special water-based solution, then heated to cure the coating and remove all oil residue remaining from the manufacturing process. These added steps create a durable, lasting rotor surface that resists road salt, solvents, and other corrosives. GEOMETåâ is a proprietary water-based coating that contains metal oxides, metallic zinc, and aluminum flakes. More environmentally friendly than other treatments containing toxic metals, GEOMETåâ coating contains no nickel, cadmium, barium, or mercury.

Read more less

ECS GEOMETåâ premium brake discs for the MQB Platform vehicles using a 340x30mm Front Brake disc from factory. ECS GEOMETåâ premium brake discs start with quality materials and precision ECS machining. That would be enough for most of us, but it is only the beginning. To prevent brake pad deposits for better braking, select a slotted ECS GEOMETåâ brake disc. Slotting cleans the pads by moving water, gasses, and contaminants away from the pad/disc contact surface. To prevent corrosiaon pitting and rust damage, ECS GEOMETåâ discs are sprayed with a special water-based solution, then heated to cure the coating and remove all oil residue remaining from the manufacturing process. These added steps create a durable, lasting rotor surface that resists road salt, solvents, and other corrosives. GEOMETåâ is a proprietary water-based coating that contains metal oxides, metallic zinc, and aluminum flakes. More environmentally friendly than other treatments containing toxic metals, GEOMETåâ coating contains no nickel, cadmium, barium, or mercury.

Read more less

Reduce weight. Reduce heat. Go Faster. Stop Faster! ECS Tuning engineered 2-Piece semi-floating rotors offer real world benefits that can be felt on both the street and track! Our 2-Piece rotors combine the advantages of weight savings and rapid heat dissipation to provide a rotor superior to stock while preventing warping and extending component life. The 18% reduction of unsprung weight by (4.2 pounds per rotor) improves handling characteristics under all situations. This reduction in rotational inertia allows for quicker acceleration, decreased braking distances, and more responsive handling. Features include: Aluminum hats: To save weight, each rotor ring is bolted to a lightweight aluminum hat made from high quality 6061 aluminum, and hard anodized with an attractive matte black finish that is both durable and corrosion resistant. Gray cast iron rings: Long known for its wear resistance and stable friction characteristics, cast iron is favored for brake rotors due to its ability to absorb and dissipate large amounts of heat. 2-Piece construction: Conventional rotors are made from 1 solid block of cast iron, causing them to be typically quite heavy and not able to quickly dissipate heat. ECS rotor hats are bolted directly to the rotor ring for massive weight savings and better ability to dissipate braking temperatures.  Heat treated: Heat treating further reduces the tendency for rotor cracking by reducing internal rotor stresses. ECS 2-Piece rotors feature side-specific directionally curved vanes which pump air through the rotor at a higher velocity, leading to consistent, rapid cooling on both sides equally.    The air velocity in curved vane rotors is higher than pillar-post rotors and straight vane rotors, and as such curved vane rotors have been shown to cool more effectively. ECS Slotted 2-Piece rotors are slotted to clean brake pads and carry away water and brake dust. Slotting reduces the effects of pad glazing that often results from extremely high temperatures by continually cleaning the pad surface, resulting in more consistent stopping. Slots are machined with a ball end mill to prevent cracking that may be present on improperly machined rotors.  Overall weight savings: This particular ECS 2-Piece rotor weighs only 19.80lbs compared to a stock GTI (PP) / Golf R rotor at 24.0lbs. Lighter rotors reduce unsprung weight and rotational mass to improve both braking and suspension performance. Manufacturing quality: Non-friction ring surfaces, including internal vents, are painted to resist salt and other corrosives. Ground braking surfaces ensure rings run parallel, and pads bed easily. Includes ECS Stainless Rotor Set Screws to eliminate rusty factory fasteners   Ready for a replacement set of rotors? ECS offers discounts on pairs of replacement rotors to the original customer or customers showing proof of ownership. Please contact the Sales Department for additional information.   *** ECS does not recommend disassembling the two piece rotors***

Read more less