Performance - Audi R8 MK2 2015

 MIL light cheater. If you fit a de-cat or high flow sports catalyst to your car, you could run the risk of having an engine light turn on. This is usually due to the fact that the sensor is reading the added exhaust gas flow and it could identify this as a fault. This lambda sensor extension may solve this problem easily, However we do recommend a re-map to ensure the issue is resolved.   M18 x 1..5 Fitment   Depending on stock levels at any given time you may be sent either the straight or right angled piece - These both function the same even though the differ in appearance

Read more less

Cat-back Exhaust - Includes - LH Connecting Pipe, RH Connecting Pipe & Rear Silencer with Valves - {Works with OE Drive Select System} Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU743 Cat-back- 76.2 3 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Includes - LH Connecting Pipe, RH Connecting Pipe & Rear Silencer with Valves - {Works with OE Drive Select System} Part No. Description Pipe Diameter (mm) Pipe Diameter (inches) Race EC approved Valvesonic SSXAU743 Cat-back- 76.2 3 No No No Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Supercup Version (EXCLUDES V10 PLUS MODELS) Part No. Description Tailpipe Pipe Diameter Race EC MSAU473 LH Connecting Pipe 3.00" (76.20mm) MSAU474 RH Connecting Pipe MSAU567 Supercup Rear Section Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Race Version (EXCLUDES V10 PLUS MODELS) Part No. Description Tailpipe Pipe Diameter Race EC MSAU473 LH Connecting Pipe 3.00" (76.20mm) MSAU474 RH Connecting Pipe MSAU519 Silencer Assembly (Race) Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Active Sound (ASU) from Milltek Sport is an innovative solution to enable a user controllable exhaust sound to be made on vehicles that traditionally lack the sound and tone that owners desire; suitable for a wide range of vehicles, the growing range includes Hybrid’s, EV and diesels. Including 8 selectable sound files, volume, pitch and tone adjustment with user configurable profiles all controlled via Milltek’s own iPhone or Android appAll our performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. We believe in continuous evolution, and our research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All of our products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market.

Read more less

Cobra Sport performance exhausts enhance the sound, looks and quality of your vehicle giving you the ultimate driving experience. This Audi R8 performance exhaust is made in stainless steel pipework and replaces the rear section from the catalysts backwards. Please Note - This performance exhaust retains the use of exhaust vacuum valves. The valves open and close depending on the vehicle's selected drive mode as with the standard exhaust system. Fitted images show the optional Carbon Fibre Tailpipe upgrade. All relevant fittings and gaskets are supplied. åÊ Press Release Following on from the success of the original 4.2 V8 Audi R8, in 2009 Audi launched the 5.2 V10 variant. The introduction of this new engine brought the Supercar‰۪s performance credentials more in line with its competitors at the time such as the Ferrari F430 and Porsche 911 Turbo S. 2013 saw the entire R8 range undergo an extensive facelift which involved some minor cosmetic enhancements and the introduction of the stunning S-Tronic Dual Clutch Gearbox. In standard form, the R8's exhaust has a satisfactory tone, generated by its high-revving Lamborghini-derived 5.2 V10. That being said, the factory exhaust is very restrictive, making for a somewhat muted and disappointing final article. Not what you would expect from a car with such a thoroughbred engine. Sheffield-based performance exhaust manufacturer, Cobra Sport, have developed a solution for this in the form of their recently launched Cat-Back exhaust system designed specifically for the first generation facelift V10 model. This new exhaust is precision TIG-welded from T304 stainless steel and is fitted with valves that integrate with the vehicle‰۪s factory configurations. The valves open and close depending on the vehicle's drive mode, so it stays subdued at idle but unleashes the full fury of its thunderous V10 soundtrack when the vehicle is in sport mode. On the static sound test, Cobra Sport's system is 10db louder than stock at 4,000rpm in sports mode but only 2dB louder with valves shut in standard mode. With zero motorway drone, the new exhaust makes for a significant improvement without ruining the excellent everyday drivability that the R8 is famed for. A noticeable improvement in power distribution higher up the rev range was experienced during testing, thanks to the free-flowing performance exhaust setup. The Cobra Sport setup offers a 13kg (43%) weight saving over standard further enhancing the vehicle dynamics. Cobra Sport's system is designed to fit in conjunction with the R8's standard tailpipes, but optional Carbon Fibre tips in O/E style are available should that be to the owner's taste. These tips really finish off the rear end of the supercar, and look particularly superb on vehicle's fitted with Audi's optional Carbon Fibre Side Blade. åÊ Media Audi R8 5.2 V10 (Gen 1) Promotional Video (Valved Cat Back Exhaust) Audi R8 5.2 V10 (Gen 1) Exhaust Sound (Valved Cat Back Exhaust) Vlog - Audi R8 5.2 V10 (Gen 1) Performance Exhaust British Touring Car Championship & UK VAG Events - Cobra Sport Brand Video. Developed on the Track, Released for the Road - Motorsport Proven Exhaust Technology.

Read more less