Performance - Audi A3 (8V)

AP Racing Formula DOT 5.1 Road / Competition Clutch & Brake Fluid. Formula DOT 5.1 is a premium specification Motor Vehicle Brake and Clutch Fluid which conforms to and exceeds the current international specifications U.S. FMVSS No 116, DOT 3, DOT 4, and DOT 5.1, S.A.E. J1703, SAE J1704 and ISO4925. - Suitable for High Performance Road Applications including vehicles fitted with ABS and ESP. - Superior -40°C (-40°F) viscosity makes it suitable for vehicles operating in cold climates. - AP Racing Formula DOT 5.1 is non silicone based. - AP Racing Formula DOT 5.1 fluid will mix safely with other DOT 5.1 fluids along with DOT 3 and DOT 4 Fluids conforming to the above specifications. - Family Part No. - CP4510-20 (20 Bottles).- Typical™ New Dry Boiling Point - 275°C (527°F)- Wet™ E.R. (Equilibrium Reflux) Boiling Point - 184°C (363°F)

Read more less

Castrol React Dot4 Performance Brake Fluid - 1ltr Castrol React Performance DOT 4 is a high boiling synthetic brake fluid which far exceeds the requirements of the SAE J1704, FMVSS 116 DOT 3 and DOT 4, ISO 4925 and JIS K2233 specifications. This product has been formulated from mixed polyalkylene glycol ethers and borate ester together with other high performance additives and inhibitors which give ultimate system protection against the effects of corrosion and high temperature vapour lock. Castrol React Performance DOT 4 brake fluid is designed for use in all brake systems particularly those which are exposed to extreme conditions such as high performance vehicles and race conditions.   

Read more less

Racingline Stage 2 ‘EVO’ MQB Golf 7/8, S3, Cupra Monoblock Brake Kit Our new Stage 2 ‘EVO’ Performance Brake upgrade is now revised with stunning, larger 4-piston calipers housing a bigger pad size (it’s the same pad as a Ferrari F40!). Bringing a real sportscar look and feel in the braking department for demanding fast road use – all at an affordable price. All the power in the world is next to useless if your stock brakes aren’t up to it. Our new Stage 2 ‘EVO’ Monoblock Performance Brake Upgrade is an ultra-durable braking solution developed exclusively for fast-road and occasional-track VWG cars. We’ve developed these brakes for street use from our decades of motorsport experience, and, as you’d expect, they provide outstanding stopping power again and again. Yet all at an affordable price. Our lightweight Monoblock one-piece construction is usually reserved for the highest-specification motorsport kits, being vastly stiffer and lighter than the original calipers. The kit comes in at almost half the weight of the original for significant unsprung mass savings. The caliper, pads and bracket assembly weigh in at 4.4kg (9.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R kit. A bigger, 345mm x 30mm ‘triple-grove’ single-piece disc (rotor) provides greater heat capacity, thus reducing the effect of fade. The larger pad size is now the exactly same pad as a Ferrari F40 uses! And now being a generic pad-size, you can choose any brand, any pad-spec when it comes to replacement. Our extensive development programme on piston sizes gives beautiful progressive pedal feel – and that’s because (unlike many) we only develop brakes for VWG cars. Included in the kit Monoblock Brake Caliper pair [GTI Red (VWR652000-RED) or Black (VWR652000-RED)] Caliper Mounting Bracket pair Full bolt mounting kit Braided Steel Brake Line Set Sport Brake Pad Set Triple Groove Brake disc pair 345mm x 30mm View Fitting Template Weight Saving Properties Saving unsprung weight is really important on a performance car. So we’ve spend a lot of our development and design time making sure that our ‘EVO’ Performance Brake Kit cuts as much weight out as possible. Our Monoblock Aluminium construction is the key to this saving – as this single piece caliper is stronger & stiffer it can therefore be lighter than equivalent 2-piece calipers. Confirmed Fitment > VW Golf 8 GTI 2020+> VW Golf 8 GTI Clubsport 2020+> VW Golf 8 R 2020+> VW Golf 8 2020+> VW Golf 7 & 7.5 GTI & Clubsport 2013-2020> VW Golf 7 & 7.5 R 2013-2020> VW Golf 7 & 7.5 2013-2020> VW Passat 2.0 TSI B8 2015+> VW Arteon 2.0 TSI 2017+> VW T-Roc R 2.0 TSI 2019+> VW Tiguan II 2.0 TSI 2016+> VW Jetta VII GLI 2019+ > Audi S3 8Y 2020+> Audi A3 2.0 TSI 8Y 2020+> Audi A3 8Y 2020+> Audi S3 8V 2013-2020> Audi A3 8V 2013-2020> Audi RS3 2.5 TSI 8V evo 2017-2020> Audi TT 3 2.0 TSI 8S 2014+> Audi TTS 3 2.0 TSI 8S 2015+> Audi TTRS 3 2.5 TFSI 8S 2017+> Audi SQ2 2018+> Audi RSQ3 F3 2019+ > Cupra Leon IV FW 2020+> SEAT Leon IV FW 2020+> SEAT Leon III Cupra 5F 2014-2020> SEAT Leon III 5F 2015-2020> Cupra Ateca 2018+> SEAT Tarraco 2.0 TSI 2018+ > Skoda Octavia IV vRS 2.0 TSI 245ps NX 2020+> Skoda Octavia IV NX 2020+> Skoda Octavia III vRS 2.0 TSI 5E 2014-2020> Skoda Superb III 1.8 / 2.0 TSI 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle.

Read more less

Pagid Dot4 Brake Fluid 500ml Pagid Dot 4 brake fluid is recommended for brake and clutch systems for which a non - petroleum fluid is specified, including ABS. Pagid DOT 4 brake fluid covers a wide range of vehicles and provides consistent performance across the temperature range. Suitable for ABS systems. Safe to mix with existing DOT 3, DOT 4. Minimum dry boiling point at 260?C. Minimum wet boiling point at 165?C. Meets the following performance specifications: FMVSS 116 DOT 4 - SAE 1703 - ISO 4925 Pagid Dot5.1 Brake Fluid - 500ml Pagid brake fluid covers a wide range of vehicles and provides consistent performance across the temperature range. In conjunction with Pagid Ceratec, Pagid brake fluid is the ideal solution for your next brake system service. Pagid Dot 5.1 fully meets the requirements of the latest issue of the US FMVSS 116 DOT 5.1 SAE J 1703, SAE J 1704 and ISO 4925 Specifications. Equilibrium Reflux Boiling point?ERBP 260? ?( it is the minimum boiling point of new or unpolluted fluid) Wet Equilibrium Boiling Point WEBP ?180?C minimum Kinematic Viscosity at -40 deg C = 900 cSt max

Read more less

Racingline Stage 3 Monoblock Big Brake Kit – MQB Platform After almost a year of test and development work, the much-anticipated ‘Stage 3’ Big Brake Kit is now available in four colours and two rotor sizes for 18″/19″ wheels. Boasting a forged monoblock caliper, designed by us from the ground up using the latest FEA Technology we think it’s easily the most dramatic big brake kit on the market – but more importantly it performs like no other. With incredibly stiff monoblock construction, and the highest burst-pressure test ever recorded by Racingline’s development team, it’s no wonder that record 100kph-0 times are being produced. The Racingline Stage 3 Forged Monoblock Brake Kit moves braking technology to a level above anything seen before in this market.The design vision was made possible by an advanced 5-axis CNC manufacturing techniques to give this kit more in common with top-level motorsport components than typical aftermarket parts. The result is a combination of ultimate track performance with lightness, stiffness and beautiful attention to detail.Each lightweight forged Monoblock caliper is a one-piece construction that starts out from an ultra-strong forged billet. Rather than two halves bolted together, our design takes a complex 5-axis CNC machining procedure to build, usually reserved only for the highest-specification motorsport kits.The result is a 6-piston caliper that is both stiffer and lighter than any other, combined with exceptional cooling characteristics and stunning detailing. Despite the size of these calipers, they weigh in significantly under the mass of the factory ones. The caliper, pads and bracket assembly together weigh 5.3kg (11.7lb) vs 8.6kg (18.9lb) for the factory Golf 7R / S3 equivalent.The kit includes 380mm fully-floating ‘triple-grove’ two-piece discs giving vastly greater heat capacity, so reducing the effect of fade. Technical Specs Fully-Floating Disc Heat treated FC-25 two-piece Steel Carbon Rotors 355mm rotors (18” wheels) 380mm rotors (19” wheels) Sprung floating hardware for near silent running Vented ‘Triple Groove’ discs with break-in-surface as standard Fast road – Pad supplied with factory pad wear sensor AP pad shape for multiple pad options Goodridge ISO, TUV DOT and ADR approved lines Racingline’s hub adaptor system What’s in the Kit? – Monoblock Front Brake Calipers (Pair)– Caliper Mounting Brackets (Pair)– Full Mounting Bolt Kit– Braided Steel Front Brake Line Set– Sport Brake Pad Set (Fast Road Use)– 380mm Fully Floating 2 Piece Brake Discs (Pair) Notes – 380mm kit will fit under 18″ Alloy Wheels– Factory 19″ wheels and other brands may require spacers– Racingline and Revo 19″ wheels will not require Spacers Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi RS3 (8V) 2015-present Audi S3 (8V) 2012-present Audi TT (8S) 2014-present Audi TT RS (8S) 2014-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Arteon (2017-present) Volkswagen Golf Mk7 2012-present

Read more less

These 2 piece discs are suited only for install with our rear adaption kit DI0019.If you do not have the kit already fitted please purchase these discs with the DI0019 kit here: The 2 piece brake discs are assembled with custom outer rotors available in plain, grooved or hooked. Matched with our lightweight aluminium bells anodised in black, this brake disc setup is not floating. Included in our kit: 2x 356x22 2 piece rear brake discs To complete this front brake kit you will need:1x DI0019 bracket kit1x Set of brake pads to suit your driving style Weight Per Disc:6.77kg FITS: AUDI A3 8V AUDI S3 8V AUDI RS3 8V AUDI TTRS 8S SEAT LEON MK3 SKODA OCTAVIA MK3 VW GOLF MK7

Read more less

The calipers included in this kit come from the Audi TTRS / RS3 8P and are made by Brembo. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The calipers are offered in black, silver, grey or red with the Aston Martin logo but we can offer these calipers in almost any colour with or without almost any logo. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either a grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 4 Piston Brembo calipers2x Caliper carriers2x 362x32 2 piece front brake discs (Grooved or Drilled)1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing FITS: AUDI A3 8P AUDI S3 8P AUDI A3 8V AUDI S3 8V AUDI TT 8J AUDI TT 8S SEAT LEON MK2 1P SEAT LEON MK3 5F SEAT TOLEDO 5P SKODA OCTAVIA MK2 1Z SKODA OCTAVIA MK3 5E VW CADDY MK3 2K VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1K VW PASSAT B6 VW PASSAT CC VW SCIROCCO

Read more less

This front brake adaption kit allows the fitment of Audi TTRS 8J / Audi RS3 8P Calipers to VAG stock 340mm or 345mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers1x Set of Stainless Steel Braided Front Brake Lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x TTRS/RS3 4 Piston Calipers (Part No’s: 8J0615107B / 8J0615108B)2x 340/345mm front brake discs (Part No: 8J0615301G or 1K0615301M or our own VBT Hooked discs 8J34030-GA or 1K34530-GA)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing FITS: AUDI TT 8S AUDI A3 8P AUDI A3 8V AUDI S3 8P AUDI S3 8V AUDI TT 8J SEAT LEON MK2 SEAT LEON MK3 SEAT TOLEDO 5P SKODA OCTAVIA MK2 SKODA OCTAVIA MK3 VW CADDY 2K MK3 VW EOS 1F VW GOLF MK5 VW GOLF MK6 VW GOLF MK7 VW GOLF MK8 VW JETTA 1K VW PASSAT B7 VW PASSAT CC VW SCIROCCO

Read more less

VBT Cross Drilled 340x30mm Front Brake Discs   The Vagbremtechnic brake discs are a direct replacement for your OE discs and have many additional benefits over a standard brake disc.   Highly durable anticorrosion coating that protects all product surfaces (internal and external)Extended service life due to improved anticorrosion durabilityPerformance pattern allowing greater cooling of braking surfaceImproved visual appearanceThe price is for 1 pair of discs FITS: AUDI A3 8V AUDI S3 8V AUDI TT 8S CUPRA ATECA CUPRA FORMENTOR CUPRA LEON SPORTSTOURER CUPRA LEON SEAT LEON MK3 5F SKODA OCTAVIA MK3 5E GOLF MK7 GOLF MK8

Read more less

ATE TYP200 Dot4 Brake Fluid - 1Ltr

Read more less

Prestone Prestone Dot 4 Brake Fluid (355ml) High boiling point-exceeds 260 degrees. Corrosion protection. Guaranteed for All braking systems including ABS, using discs or drums.

Read more less

Racingline RP700 Rear Brake Pads Our new RP700 Brake Pads are replacement brake pads for cars using the standard brake hardware, with applications for multiple MQB (and some other) performance models. Drive your car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP700 Brake Pads come in. Using an advanced high friction material, these new pads provide a dramatic improvement in the braking department.  A straight replacement for the factory pads using the standard brakes, yet delivering a much higher resistance to high temperature fade.

Read more less