Ford Fiesta MK7 Pre Facelift
Auto Specialists Fiesta Mk7 Bonnet spacer blocks 'release the heat' Includes ST & ZS Models
After being very popular for other ford models, AutoSpecialists are pleased to announce their Bonnet spacer kit for Fiesta Mk7 and 7.5 including ST180 The spacers raise the rear of the bonnet up by 23mm and can be fitted within 30 minutes with special inverted bolts. HOW DO THEY FIT? Lift the bonnet up and put a soft cloth under the bottom corner of the bonnet and then one side at a time remove the 2 x 10mm bolts attaching the bonnet hinge to the bonnet, discard the old bolts and install the billet spacer block and use new inverted bolts to secure. It's that easy! A great low cost way to change the look of your Fiesta and release high under bonnet temperatures for Fast Road or Track use £34.95 for a complete kit 2 x Billet spacers and complete with stainless fixings
£42.50
-
Auto Specialists Fiesta Mk7 Battery top securing plate, Plain or with AS logo
Mirror finish stainless steel, easy fit and comes with stainless fixings. Fits all Petrol & Diesel Fiesta Mk7 Directly Replaces fords mild steel version, with something a little more shiney. Fittings included. x2 stainless washers and x2 stainless nylon nuts. If you wish to have the logo, please message us after ordering otherwise plain will be sent.
£26.04
-
Auto Specialists Polished Oil filler cap with raised oil can logo - ST, Zetec & Zetec -S Petrol models
To fit Black Top Zetec, Mk6, Mk7, Mk8 Fiesta, Mk3 FocusPush ‘n’ twist oil Filler Cap, with Raised Oil Can Logo.Made from solid billet alloy and polished to a mirror finish, this is a complete replacement cap.Please note this replacement cap is not made from stainless steel
£36.40
-
Auto Specialists Zetec & Zetec-S Mirror finish stainless steel Camshaft cover with logo.
The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.6 Petrol Fiesta Mk7 Zetec models (Except ST) Comes with stainless steel fittings, please choose from plain or logo. Please note, come with full instructions and fittings. Very Basic Mechanical Knowledge needed to fit.
£66.57
-
Auto Specialists Zetec 1.25 & 1.4 LTR Mirror finish stainless steel Camshaft cover with logo
The Original ford camcover doesn't look great does it? well our new Bolt on design camcover will sort that out nicely. Easy bolt on Design, will finish off your Camshaft cover a treat! Fits All 1.25 & 1.4 Petrol Fiesta Mk7 Zetec models Comes with stainless steel fittings, please choose from plain or logo.
£43.42
-
Auto Specialists AutoSpecialists Brake Reservoir Cap Cover with Logo
Brake reservoir cap cover with information logosGrooved inside so it fits perfectly over original Ford brake reservoir capA must for any show car, or detailed, road car!Please note, this cap is machined from alloy not stainless steel. Fits all Focus Mk2 & Fiesta Mk7 & MK8 (Including STs)
£36.40
-
Auto Specialists Titanium Exhaust Wrap Higher Temperture Wrap for Turbo Manifolds
Titanium Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enough to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!
£28.89 - £37.56
-
Auto Specialists High Temperature White Exhaust Wrap
High Temperature White Exhaust wrap 2" wide & length 50ft comes with 20 assorted size stainless zip ties. Easy fit. Simply wrap exhaust wrap around your desired part i.e. manifold and then use the stainless zip ties to secure. 50ft will be more than enought to wrap a manifold and down pipe 'normal size' (Cosworth or RS Turbo) Wrap up! Heat wrap all those Turbo down pipes, manifolds and stop or prevent burnt wiring, cooked starter motors and more!
£23.15 - £31.84
-
Auto Specialists AutoSpecialists Power Steering Cap with Logo
Power steering cap cover with Power steering logo Perfectly cnc'd with cog type profile inside for the perfect fit, then polished to a mirror finish To fit Mk4, Mk5, Mk6, Mk7, Mk8 Fiesta, Mk1/2 Focus and Mondeo mk2 puma Now made in Aluminium.
£36.40
-
Auto Specialists AUTOSPECIALISTS FUSE BOX COVER FOR FIESTA MK7
Fits all Petrol & Diesel Mk7 Fiesta's including ST Turbo This cover, covers up black plastic auxilary fuse box cover which is located in the Engine bay. Finished in mirror finish stainless steel and comes with strong self adhesive pads for easy fitting.
£49.19
-
Auto Specialists Clubsport by AutoSpecialists Lightweight Composite Front Wings (PAIR) for Fiesta Mk7 incl. ST180
Currently made to order, please allow 2-3 weeks before dispatch. Due to shipping costs, ALL CUSTOMERS please contact us for a shipping quote before ordering. Clubsport by AutoSpecialists lightweight composite wide arch front wings for the Fiesta Mk7 – will fit all models including ST180 variant. Made from a high-quality, single-skin fibreglass construction, these lightweight panels are designed to directly replace the entire standard front wings and incorporate our AutoSpecialists Design wider exterior wheel arch to allow the fitment of bigger wheels and tyres. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed. Designed to attach using original Ford mounting points, holes and fixings. Features: High quality direct replacement Huge weight saving and improved performance Approx. 30mm wider each side to allow a larger wheel and tyre Ideal for race and track focused cars OPTIONAL front arch extension finishing pieces are available Front wings – 750g!
£435.49 - £495.13
-
Auto Specialists Clubsport by AutoSpecialists Lightweight Composite Bonnet for Fiesta Mk7 incl. ST180
Due to shipping costs, ALL CUSTOMERS please contact us for a shipping quote before ordering. Clubsport by AutoSpecialists lightweight bonnet for the Fiesta Mk7 – will fit all models including ST180 variant. Made from a high-quality, double-skin fibreglass construction, this lightweight panel is designed to replace the standard bonnet. **IMPORTANT** Unpainted, comes finished in white or black coating. We HIGHLY recommend these items are fitted by a reputable body shop. Due to the moulding process and hand finishing of GRP parts, there may be some extra surface preparation on some of the items. Please ensure that your body shop has allowed for any extra preparation, tweaking and adjustments often required on GRP parts for a perfect fit before painting. It is important to trial fit all parts before preparation and painting. Once items have been prepared, primed, painted or modified in any way we cannot accept return of any unwanted items. Not all body shops are specialists in fitting GRP body kits and accessories, please ensure they quote accordingly to include any surface prep needed. Original Ford bonnet hinges, fit as per the standard item – NOT INCLUDED Designed to attach with bonnet pins/Aerocatches – NOT INCLUDED Features: High quality replacement Huge weight saving and improved performance Ideal for race and track focused cars Bonnet – 5kg without vents vs approx. 12kg OEM
£520.94£496.13