Silicone Hoses

AIRTEC Motorsport Induction Kit for Ford Ranger 3.2 TDCI. Designed to improve performance, without changing the OEM factory look of the engine bay. AIRTEC Part No: ATIKFO32 TECHNICAL DATA AIRTEC Motorsport Induction Kit for Ford Ranger 3.2 TDCi Designed to improve performance without changing the OEM factory look of the engine bay. The AIRTEC induction kit utilises the factory air box set up by replacing the restrictive internal components to improve flow.  You can choose from the option of a full induction kit (air filter & silicone hose), AIRTEC by ITG air filter only or Pro Hoses silicone induction hose only. AIRTEC by ITG filter Manufactured by leading air filter supplier ITG, our reusable air filters feature of a galvanised mesh core for added strength under load. The three stage layered foam allows maximum performance from the air filter, which works differently to the paper or cotton alternatives that can be known to trap and retain particles on the outer layer. Using the latest adhesive technologies to bond the foam layers, ITG filter assemblies are totally resistant to water, fumes, oils and fuels – including any exotic fuels used for racing. The filter consists of the ITG Tri-Foam layered system: Stainless-Steel Wire Mesh CoreTo avoid erosion, only the highest quality of steel is used. Coarse Outer LayerStops large pieces of dirt and foreign matter from penetrating further. Straightens air flow into subsequent layers. Medium Grade Mid-LayerSerious filteration layer that traps most of the harmful dirt that leads to engine failure. Fine Inner Layer.Extracts all the fine particles but still allows full air flow to the engine for maximum performance. Pro Hoses Silicone Induction Hose Designed to replace the plastic factory hose, the four-ply silicone hose has a larger internal diameter for increased flow. The smooth internals means no restrictions or loss in power and increased airspeed through the intake s whilst utilising the OEM PCV take-off location. AIRTEC part no: ATIKFO32

Read more less

TECHNICAL DATA Why not add top alloy boost pipe kit for just £129.95 which includes 2 x alloy boost pipes, 1 x silicone joiner and stainless jubilee clips. Fits Citreon DS3, Peugeot 207 GTI, Peugeot 208 GTI. Part no: ATINTP&C4

Read more less

  As part of our expanding Audi product range, proud to launch our enlarged cold side pipe kit for the RS3 8V kit for fast road or track use. Designed to match our enlarged turbo elbow, our in-house design engineer team have created an enlarged pipework kit to replace the entire cold side, from the intercooler all the way to the throttle body. From the intercooler, our high-quality Pro Hoses silicone boost hose tapers up from 70mm to maintain 80mm all the way to the elbow, which equates to a 23% increase in comparison to the original pipework. Our AIRTEC Motorsport replacement cast aluminium elbow is nearly 10% bigger than standard and measures 85mm at its widest point, offering a significant improvement in flow and internal capacity. This improves throttle response and reduces restriction, which is key for those chasing increased power from their cars. A direct replacement, the kit also features a CNC-machined throttle spacer that incorporates a meth port, if required.   The kit comes with detailed fitting instructions and the comprehensive package also includes replacement Pro Hoses boost hoses, a new O-ring and all fixtures and fittings required for installation. Finished in powder coated black with a AIRTEC Motorsport cast logo, this uprated cold side kit offers a great benefit for modified RS3 8V owners. Features: Up to 23% increase in internal capacity  Meth port incorporated into machined spacer High-quality cast aluminium construction Pro Hoses silicone connectors Powder coat black finish Direct replacement part  Comprehensive fitting guide included 

Read more less

K&N's 57S Filter element only, is supplied with a rubber bung which once removed increases waste gate turbo chatter noise! it can be easily replaced if you require a quieter driving experience.   K&N Performance FILTERS increase horsepower and acceleration by dramatically reducing air flow restriction caused by the original factory design. They come with K&N's Million-Mile Limited Warranty. 57S series air-filter replace the factory air filter housing with a fully enclosed injection modified air box containing a reusable K&N air filter. Installation is easy as they are specifically engineered to use factory holes and mounting points. No additional hardware, cutting or drilling is required Pro Hose brings you another World leading quality hose, this Induction hose upgrade is available in the following colours Frozen White Bright Red Gloss Black Bright Blue Grey Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Bring your 2016 Focus Mk3 RS engine bay to life with Pro-Hose, the Professional choice

Read more less

TECHNICAL DATA AIRTEC Motorsport Stage 1 Uprated Big Boost Pipes for the Mini F56 John Cooper Works. A must for all tuned examples, our larger boost pipes offers improved flow with less restriction over the car’s original boost pipes. All connectors have swaged ends to stop the pipes blowing off under pressure. Includes three metal hard pipes, one hose joiner and two Pro Hoses silicone hoses. Available in Motorsport Silver and with Black, Blue and Red silicone hose colours to choose from. Designed to fit with our AIRTEC uprated intercooler only.

Read more less

The new design Stage 2 induction kit that works perfectly with the standard Focus RS MK3 Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Features. Removes ugly original plastic & restrictive airbox Adds power and torque,  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss with AS engraved logo Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Adds style to your engine bay Easy fitting Conclusion. It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard quickly (warranty) Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering! 

Read more less