Performance - RS3 8V

Racingline Front Subframe Brace for MQB/MQB EVO MQB & MQB ‘evo’ cars rely on either a thin stamped-steel or cast alloy OE front subframe. This subframe has to channel all of the immense forces generating by hard driving. ​RacingLine’s bolt-in Front Subframe Brace provides much needed support and rigidity to aid accurate handling dynamics. Not surprisingly, with all of these forces combining in your subframe, significant deflection results, which affects wheel alignment and harms the precision in your steering as it flexes. RacingLine’s Billet Front Subframe Brace stiffens up the rear of the subframe with an intricately machined aluminium replacement, greatly improving stiffness under load. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. This is a highly recommended upgrade to protect and enhance your car – whether it’s hard-driven, high-power or used on track. Confirmed Applications For all MQB & MQB EVO AWD ModelsVWR810006 VW Golf 8 GTI 2020+VW Golf 8 GTI Clubsport 2020+VW Golf 8 R 2020+VW Golf 7 & 7.5 GTI & Clubsport 2013-2020VW Golf 7 & 7.5 R 2013-2020VW Golf 7 & 7.5 2013-2020VW Passat 2.0 TSI B8 2015+VW Arteon 2.0 TSI 2017+VW T-Roc R 2.0 TSI 2019+VW Tiguan II 2.0 TSI 2016+VW Jetta VII GLI 2018+ Audi S3 8Y 2020+Audi A3 8Y 2020+Audi S3 8V 2013-2020Audi A3 8V 2013-2020Audi RS3 2.5 TSI 8V evo 2017-2020Audi TT 3 2.0 TSI 8S 2014+Audi TTS 3 2.0 TSI 8S 2015+Audi TTRS 3 2.5 TFSI 8S 2017+Audi SQ2 2018+Audi RSQ3 F3 2019+ SEAT Leon IV FW 2020+SEAT Leon III Cupra 5F 2014-2020SEAT Tarraco 2.0 TSI 2018+SEAT Leon III 5F 2015-2020 Cupra Leon IV FW 2020+Cupra Ateca 2018+Cupra Formentor 2020+ Skoda Octavia IV vRS NX 2020+Skoda Octavia IV NX 2020+Skoda Octavia III vRS 5E 2014-2020Skoda Superb III 3V 2015-2020 Applications Please note, customers are wholly responsible for checking fitment for their vehicle. SKU: VWR810006

Read more less

Racingline Billet Underbody Tunnel Braces Want to sharpen up your MQB handling responses? MQB Billet Underbody Tunnel Braces mount under the body to help fight body flex. This improves rigidity to help refine the handling, whilst also providing valuable extra clearance for larger diameter exhaust system. What do they do? MQB cars rely on thin stamped-steel OE tunnel braces underneath in an attempt to reinforce the body’s weaker points and limit chassis flex under demanding loads. Our new Billet Underbody Braces replace these weak braces with intricately machined aluminium replacements, greatly improving stiffness, giving much better exhaust clearance and even look great! CNC Machined from a solid billet of 6061-T6 Aluminium, each brace has been engineered to remove unnecessary material whilst still increasing rigidity. With any 3″ diameter exhaust system, the OE brace gives insufficient clearance. So rather than removing the tunnel brace, our new Rear Tunnel Brace at last gives you the option to replace it, giving you the clearance you need plus maintaining crucial body stiffness. Despite adding stiffness, this improved dynamic performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The brace designs mean that installation is simple, using existing body mounting points with no drilling or trim removal required, ensuring fitment is completely reversible. We offer two braces – a Centre and a Rear Tunnel Brace. Owners of FWD cars can fit both, AWD cars can only fit the Rear Tunnel Brace. Looking to fit a larger bore Exhaust System? For large diameter aftermarket exhausts, there simply isn’t clearance space above the factory tunnel brace. Many owners have no choice but to remove the brace. But the brace is there for a reason. With the extra clearance our Rear Tunnel Brace gives, you can now maintain strength and fit your bigger exhaust. VWR810005 – Rear Tunnel BraceVWR810004 – Centre Tunnel Brace (Front-wheel drive only)

Read more less

Racingline Audi S3/RS3 Lowering Springs Lowering Range:* 20mm Front and Rear Racingline lowering springs are the perfect first addition to your Audi S3 (8V). If you use your car on a daily basis and are only looking to uprate one aspect of your car, you can’t do better than our VWR Sport Springs. They replace the car’s four standard springs with re-engineered, different-rate and slightly shorter Sport Springs. The vehicle’s center of gravity is lowered, reducing body roll for better dynamics, whilst maintaining the ride quality and comfort of your car. Meanwhile, the car’s appearance is transformed. By getting rid of those nasty wheelarch gaps, it’ll look like it always should’ve from the factory! Compatibility Audi S3 2013+ (8V) – 3-Door Hatch, 5-Door Sportback and 4-Door Saloon Audi RS3 2015+ (8V) – Sportback and Saloon Perfect Performance. Many experts consider suspension development to be as much an art as a science. In truth, it’s a bit of both. Go lower or stiffer than our springs and your car will bounce and crash as the dampers are mismatched to spring-rate, and the springs themselves run out of travel. Our progressive-rate spring construction means the spring rate in the middle of travel is very similar to standard. It’s only towards the end of the spring’s travel (so, when braking or cornering hard) that we have engineered the spring to stiffen up. It’s this progressive-rate spring design that gives such good ride quality. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR3130RS

Read more less

Racingline Sport Lowering Spring Set – Audi RS3 8V (Saloon models) & S3 8Y Racingline Performance Sport Springs are engineered to replace the standard springs with a shorter and stiffer spring, while lowering the centre of gravity they will also help to reduce body roll for better handing over the standard springs and while offering fantastic ride quality and comfort, which can be improved from the standard ride on some applications. Lowering Range: 25mm Front and Rear will fit the following models: - Audi S3 8V 3-Door Hatch - Audi S3 8V 5-Door Sportback - Audi S3 8V Saloon - Audi RS3 8V 5-Door Sportback - Audi RS3 8V Saloon     These springs have been designed to work in harmony with the standard dampers so no other changes are needed. Racingline Performance Sport Springs are for customers who demand performance over the stock setup without costing thousands! The spring range offered by Racingline Performance are not designed to drastically lower the vehicle, however for those of you who do want this you can look at the Racingline Performance range of coilover kits. Applications Please note, this information is a combination of supplier provided compatibility data and our workshop expertise. While every effort has been made to ensure the accuracy of this information Racingline Shop/VAGManchester are not liable for abnormalities or inaccurate data. Customers are wholly responsible for checking fitment for their vehicle. SKU: VWR3130RS

Read more less

Racingline Performance Carbon Fibre Rear Body BraceThe new Rear Body Brace fits Hatch and Sportback A3 / S3 / RS3 8v models. It uses solid billet aluminium mounts secured into beautiful, ultra-stiff 3K-twill carbon fibre link bars to drastically stiffen the rear of the chassis.Modern cars like the Golf run a pretty stiff laser-welded body-shell. Up front, the chassis is very rigid between the suspension tops, but at the rear there is much more chassis flex which negatively affects vehicle handling in hard use, especially when combined with stiff suspension or under the sort of loadings that track use puts on the car. The new RacingLine Rear Body Brace solves this issue by locking the crucial hard points together.  By reinforcing and tying the rear strut towers together, the brace helps to maintain proper suspension geometry under heavy cornering loads. Remove the body-shell flex, and the suspension geometry can work as it was designed to do.Despite the added stiffness, this improved handling performance comes without sacrificing any ride quality or introducing any additional noise, vibration, or harshness into the cabin. The clever design means that installation is simple, using existing body mounting points with no drilling needed and no removal of trim required, and is completely reversible.RacingLine haven’t forgotten about practicality either. The brace is compatible with rear seats in either the up or down position, and due to the slim profile, boot space is almost unaffected. Even the load tie-downs have been incorporated into the lower mounts. Track your car on Sunday, school-run on Monday! Fitment Info:- Audi A3 8V 3 Door Hatch- Audi A3 8V Sportback - Audi S3 8V 3 Door Hatch - Audi S3 8V Sportback- Audi RS3 8V Sportback

Read more less

PFF85-833 replaces the lower half of the original bush OEM part number 5Q0198 037 B and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037B / 5Q0198037F OEM Part Number: 5Q0199867 / 5Q0199868 Price Ex. VAT: £46.45 Price Inc. VAT: £55.74 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING             

Read more less

PFF85-833 replaces the lower half of the original bush OEM part number 5Q0198 037 B and includes an insert to fit into and fill the voids in the upper bush. This unique bush has been designed to be fitted without subframe removal from the vehicle and avoids associated wheel alignment costs. OEM Part Number: 5Q0198037B / 5Q0198037F OEM Part Number: 5Q0199867 / 5Q0199868 Price Ex. VAT: £50.95 Price Inc. VAT: £61.14 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING                 

Read more less

OEM Part Number: 5Q0198037B / 5Q0198037F OEM Part Number: 5Q0199867 / 5Q0199868 Price Ex. VAT: £32.95 Price Inc. VAT: £39.54 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING                     

Read more less

This bush fits 4 wheel drive models only. OEM Part Number: 1K0599437 OEM Part Number: 1K0599438 Quantity per car 2 (Price is for amount in pack)    INSTRUCTIONS/DRAWING       

Read more less

This bush fits 4 wheel drive models only where the differential casing front mount measures 35mm in width. The 35mm differential casing mount is found on AWD MQB platform and 2015-on PQ35 platform vehicles. The OEM rubber front mount must be part number 1K0 599 437 for this bush to replace. If in doubt, measure the height of the casing front mount before ordering. If the mount is 30mm in height or the OEM part number on your vehicle is 1K0 599 431 then use PFR85-523. OEM Part Number: 1K0599437 OEM Part Number: 1K0599438 Size 30mm Price Ex. VAT: £30.95 Price Inc. VAT: £37.14 Quantity per car 1 PRODUCT PRICING INFORMATION The prices shown on our website are per bush.To get the total pack price you will need to multiple this price by the number of bushes per vehicle. Bush Price x Qty Per Car = Pack Price INSTRUCTIONS/DRAWING       

Read more less

OEM Part Number: 5Q0505311D OEM Part Number: 5Q0505311F Quantity per car 2 (Price is for amount in pack)

Read more less

OEM Part Number: 1K0505553A Quantity per car 2 (Price is for amount in pack)

Read more less