Performance - Ibiza MK3 (6L)

RACE APPLICATION ONLY - NOT FOR ROAD USEThe calipers included in this kit are 6 Piston made by AP Racing. The piston sizes are matched extremely well to provide a pedal feel that is just like OEM. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 2 piece brake discs are assembled with outer rotors made by AP Racing which are of the highest quality steel and come in either grooved or drilled. Matched with our lightweight aluminium bells finished anodised in black, this brake disc setup is a floating 2 piece assembly and the float is in the disc bell rather than the disc. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x 6 Piston AP Racing calipers2x Caliper carriers2x 362x32mm 2 piece front brake discs1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI S1 8X AUDI A3 8L AUDI S3 8L SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK1 6Y SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This disc installation kit comes with everything you need to install our 1 piece 330x28mm front brake discs. Excluding calipers & pads. The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The 1 piece brake discs are 330x28mm from a different vehicle manufacturer which we have modified to allow fitment to your car. We dimple the discs to give it that Porsche turbo look. We also include hub centering rings which reduce the larger center bore of these discs to match VAG hubs to ensure correct fitment. Lastly the fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. New pads are highly recommended to be installed. Included in our kit:2x Caliper carriers2x 330x28 1 piece front brake discs (Dimpled Only)2x Disc mounting screws2x Centre bore reducing rings1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche Boxster calipers (Part No's: 996.351.425 / 996.351.426)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI S1 8X AUDI A3 8L AUDI S3 8L SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

RTS has developed the ultimate SMF conversion kit & flywheel specifically for the 1.9 TDI engine. RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer. RTS kit has been designed with a higher clamp load enabling the clutch system to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. RTS Twin Friction kit has been designed with a higher clamp load allowing. Included in the Kit: Pressure Plate Clutch Plate (HD, Twin Friction or Paddle) Single Mass Flywheel Bolts (Pressure Plate & Flywheel)   Suitable for the following 1.9 TDI 6 Speed Manual Cars Audi A3 Ford Galaxy Seat Alhambra Seat Cordoba Seat Ibiza Seat Leon Seat Toledo Skoda Fabia Skoda Octavia Volkswagen Bora Volkswagen Golf MK4 Volkswagen Polo Volkswagen Sharan

Read more less

Non-resonated (louder). With Single Polished Oval. For facelift models (with Cupra rear bumper) Part No. Description Tailpipe Pipe Diameter Race EC MSSE117REP Centre Section Replacement Pipe 2.50" (63.50mm) MSSE124 Rear Silencer Single Oval Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

Non-resonated. Polished Tip Twin Jet MSSE117REP Centre Section Replacement Pipe 2.50" (63.50mm) MSSE120 Rear Silencer (Twin Jet) Twin 76.2mm Jet Why Buy a Milltek Sport Exhaust? Milltek Sport stainless steel exhausts have a genuine performance edge - noticable power gains, sounds that are truly awesome, styled looks that are aggressive but discrete and a feeling of true exhilaration. Transforms performance and driveability Sharper throttle response Substantial weight saving over original equipment exhaust systems Precision, quality controlled manufacture to ISO 9001 standards Highest quality aircraft-grade stainless steel Low pressure stainless exhaust systems for maximum performance - with no loss of low end torque High quality type-304 aircraft grade stainless steel Over 30 years of continuous exhaust development and technical expertise Ever expanding comprehensive selection of performance exhausts Milltek Sport are on tuning companies ‘must-have’ list and are exported to over 70 countries worldwide Designed and manufactured in the UK Milltek Sport stainless steel exhausts come with a lifetime guarantee for the first purchaser (excluding cats & flexis)   Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers' stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer. Mandrel bending ensures full flow bends for better gas flow and Milltek Sport exhaust systems are increased in bore to ensure ultimate performance without the loss of mid-range torque. All Milltek Sport exhausts are designed, developed and manufactured in-house in the UK.

Read more less

RTS has developed the ultimate SMF conversion kit & flywheel Single Mass Flywheel RTS Single Mass Flywheel offers a particularly suitable solution for vehicles where the original DMF is unable to dissipate heat effectively, but in addition, it offers greater longevity over DMF technology and is much more cost effective to replace.Technically, the SMF will reduce engine vibrations due to the increased inertia of the solid flywheel. In addition, the SMF is extremely durable, due to its efficient heat dissipation qualities and the lack of complex high wearing flywheel components.Additionally, providing increased protection to your transmission as our clutches absorb more NVH and a longer life over the troublesome DMF.Weighted the same as the OE DMF allowing you to keep the changes in pedal and noise down to a minimum, and keeping MOI (Moment Of Inertia) on the crank the same as the OE, as to minimise the risk of crank walk.   Twin Friction   RTS unique “Twin Friction” (drive plate) has been developed using a unique flywheel side friction material whilst adopting a segmented pressure plate face. The aramid friction exhibits 50% less wear than a conventional drive plate friction material.This material also reduces the effects of fade. Fade is the decline in the clutch system’s ability to transmit torque as operating temperatures increases. These features in combination with the previously mentioned micro-structure of spheroidal casting and ER2 technology allows the clutch kit to dissipate heat far more effectively, allowing the clutch to run cooler for longer.RTS kit has been designed to transmit 60% more torque over the standard clutch kit and is suitable for every day driving, fast road and track/circuit racing whilst maintaining user-friendly driving experience. Paddle   Due to its inherent design, engines are subject to rotating fluctuations. To minimise/prevent this, the NVH is absorbed by RTS unique clutch damper – function which suppresses the movement of the free, spinning gears and vibration transmitted to the transmission. Paddle will hold more power as it has a ceramic pad material on both sides. This is more suited towards high power builds and non-daily / occasional track use. These performance clutches will have a heavier feel to it.   Suitable for the following 5 Speed Manual Cars Audi A1 (8X) Audi A3 (8L) Audi TT (8N) Seat Leon MK1 Seat Ibiza MK2 Seat Ibiza MK3 Seat Ibiza MK4 Seat Cordoba Seat Toledo MK2 Skoda Octavia MK1 Skoda Fabia MK2 Volkswagen Golf (MK3) Volkswagen Golf (MK4) Volkswagen Polo (MK4) Volkswagen Polo (MK5)

Read more less

Go on, admit it. There are times you wish you could have that signature turbo blow off sound, but you’re not prepared to listen to it all the time. GFB’s Deceptor Pro II delivers just what you need – the ability to control how loud your BOV sound is, from the driver’s seat. To top it off, if your car typically suffers issues such as backfiring and stalling when venting more than a certain percentage of air to atmosphere, the controller can easily be configured to limit the maximum venting ratio. This way, you can achieve a blow-off sound without having to put up with the issues. Complete range of fitment options The Deceptor Pro II direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. ONLY COMPATIBLE WITH:     Audi A3 A4 TT       Ford FOCUS       Seat IBIZA LEON       Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

The much loved 1.8T engine has proved itself as being not only being very capable in producing high power figures but in being very reliable at the same time. The key to this reliability is the lubrication system, which can quickly become overwhelmed when cars are driven quickly - or on track - causing oil starvation. Under extreme acceleration, braking or cornering, the oil can momentarily run out of the sump under centrifugal force, causing a temporary starvation through the oil-ways, putting critical bearings and bores at risk of damage.For those with bottomless pockets, a ‘dry sump’ system is the ideal preventative solution. But for those in the real world, our neatly engineered solution, based around a brand new OE-spec sump pan is the perfect alternative. Carefully configured baffles and Viton oil control valves ensure that the lubricant can easily move around the engine, but retains a minimum sump capacity, even under the most severe of ‘g’ forces. The relatively soft Viton plates react far quicker than equivalent metal flaps - which are often used on lesser alternatives - and have been designed to withstand the rigours of the high temperatures of oil and its contaminants.Our 1.8T Baffled Sump (FMBSMP18T) is a truly effective upgrade. An essential item for any race, track or tuned car its makes a sensible investment. It’s certainly cheaper than an engine rebuild! Our baffled sump comes complete with an oil level sensor blanking plate if you do not have a sensor fitted.   Fits Multiple Cars

Read more less

This front brake adaption kit allows the fitment of Porsche 996TT Calipers to VAG stock R32 334mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with quality spring washers. Included in our kit:2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche 996TT calipers (Part No's: 996.351.429 / 996.351.430)2x 334mm front brake discs (Part No's: 8N0615301B / 8N0615302B)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI A3 8L AUDI S1 8X AUDI S3 8L AUDI TT 8N SEAT IBIZA 6J MK4 SEAT IBIZA 6L MK3 SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA 5J MK2 SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

This front brake adaption kit allows the fitment of Porsche Boxster Calipers to VAG stock 312mm brake discs (see below for required parts & part numbers). The caliper carriers are made from lightweight aluminium. These have steel thread inserts for strength along with a black anodised finish. The supplied front brake lines have been made to our specifications by HEL Performance, which include stainless steel fittings and are finished in their carbon black sheathing. The fitting kit includes bolts that are high tensile M12x1.25 coupled with A2 stainless spring washers. Included in our kit: 2x Caliper carriers1x Braided front brake lines4x Caliper to carrier bolts4x Spring washers for caliper to carrier bolts To complete this front brake kit you will need:2x Porsche Boxster calipers (Part No's: 986.351.421 / 986.351.422)2x 312mm front brake discs (Part No: 8N0615301A or our own VBT Hooked discs 8N31225-GA)1x Set of brake pads to suit your driving styleBrake fluid to flush system when installing   FITS: AUDI A1 8X AUDI A3 8L AUDI S1 8X AUDI S3 8L AUDI TT 8N SEAT IBIZA MK3 6L SEAT IBIZA MK4 6J SEAT LEON MK1 SEAT TOLEDO 1M SKODA FABIA MK2 5J SKODA OCTAVIA MK1 VW BEETLE 1997-2010 VW BORA 1J VW GOLF MK4 VW POLO MK4 9N VW POLO MK5 6R/6C

Read more less

All the performance with or without the noise! If cars like yours typically suffer issues such as backfiring and stalling when using a fixed-ratio atmosphere-venting BOV, the Respons can help. By adjusting the venting bias to suit the car you can achieve a blow-off sound without having to put up with the issues. Like all GFB valves, the Respons utilises GFB’s proven TMS Technology to ensure rapid boost recovery on gearshift and optimum throttle response, as well as the ability to withstand boost pressures of 100psi+. Put simply, it can hold more boost than any turbo could produce. How GFB’s patented venting bias adjustment works Twisting the adjusting ring opens up the atmo port, whilst the recirc port is simultaneously closed.This results in possible venting ratios ranging from 100% recirc, right through to 100% atmosphere and anywhere in between. Complete Range of Fitment Options The Respons direct fit bolt-on range covers a huge list of popular vehicles. You can also purchase a variety of hose and flange adaptors for custom fitments. Performance AND sound without compromise! Patented Venting Bias Adjustment system - can be infinitely adjusted between full recirc (silent) and full atmosphere (loud) Change the venting bias simply by twisting the adjustment ring TMS Technology for up to 30% faster boost recovery on gearshift Huge range of direct bolt-on kits 100psi+ boost holding ability Manufactured in Australia in accordance with ISO 9001     Related Videos:     ONLY COMPATIBLE WITH:     Audi A3 A4 TT       Ford FOCUS       Seat IBIZA LEON       Volkswagen BORA GOLF NEW BEETLE PASSAT POLO

Read more less

Takes over where the factory regulator stops Direct fit replacement for Bosch clip in regulators More than double the flow of the factory regulator, allows increased pump capacity without having to replace the factory fuel rail Gasoline, ethanol, and methanol compatible Double layer/double reinforced diaphragms with a burst strength exceeding 1000psi Teflon co-polymer seat with stainless valve to retain fuel pressure longer after shut down Spring pre-load adjustment platform is o-ring sealed and does not leak vacuum/boost Static pressures adjustable from 1.4-5bar (20-72psi – subject to pump flow and factory return line restriction) Completely serviceable GFB’s popular and compact FX-S Fuel Pressure Regulator is now also available as a direct drop-in replacement for the common Bosch regulators that clip into the fuel rail. If you increase the performance of your engine, you need to ensure your fuel system can deliver the goods or you’re going to have a bad day! Upgrading the fuel pump is the first step, but doing this alone will usually result in excessive fuel pressure, especially at idle. This is because the factory Bosch regulators typically don’t flow enough to support larger fuel pumps, especially with turbo E85 setups that demand high fuel flow rates. Rather than replacing the entire fuel rail, or using an adaptor with a separate fuel pressure regulator, simply clipping in the FX-S 8051 will allow you to run a much larger pump setup even with the factory rail. And if you need to adjust the fuel pressure, that’s no problem - unlike the fixed-pressure Bosch regulators, the FX-S can be adjusted from 1.4bar to 5bar. Like all GFB FX regulators, the FX-S 8051 is compatible with pump gas, Ethanol, or Methanol, and also incorporates a soft Teflon valve seat (rather than metal on metal) that will always positively seal and hold fuel pressure on shut down for reliable engine startups. The double layer diaphragm has twice the reinforcing material of the single layer type used in most regulators, and as a result the burst strength exceeds 1000psi! The 1/8” NPT port can be used for a fuel pressure gauge or electronic pressure sensor, or it can simply be plugged using the port plug provided.       All GFB FX Regulators Feature: 1:1 FUEL PRESSURE RISE RATE SUITABLE FOR UNLEADED, ETHANOL, METHANOL AND DIESEL FUELS DOUBLE LAYER/DOUBLE REINFORCED DIAPHRAGMS WITH A BURST STRENGTH EXCEEDING 1000PSI TEFLON CO-POLYMER SEAT WITH STAINLESS VALVE TO RETAIN FUEL PRESSURE LONGER AFTER SHUT DOWN FULLY SEALED UPPER BOOST/VACUUM REFERENCE CHAMBER STATIC PRESSURES ADJUSTABLE FROM 28PSI TO 72PSI (2-5BAR) COMPLETELY SERVICEABLE MULTIPLE BODY PORTS ALLOW FOR A LARGE VARIETY OF SETUP OPTIONS MANUFACTURED IN AUSTRALIA IN ACCORDANCE WITH ISO 9001 GFB’s Fuel Pressure Regulators are built with the same precision, machining quality, and reliability that is the foundation of all GFB products. The compact size of the GFB FX regulators conceals a large flow capacity, and the multiple ports allow for a variety of fuel system setups including multiple rails and gauge/pressure sensor monitoring. Internally, like all GFB products you’ll find unique features and small touches that make the difference between a good product, and a great one. For example, we use a double-layer, double-reinforced diaphragm with a burst strength exceeding 1000psi (68BAR)! Unlike others that use a metal-to-metal valve seat, the FX regulators feature a replaceable soft Teflon valve seat that helps retain fuel pressure longer after the car is shut down for easier re-starting. We even went to the trouble of adding an o-ring sealed spring hat to ensure no boost/vacuum leakage through the spring adjusting screw. All FX regulators have a 1:1 fuel pressure rise rate and a base pressure range from 28-72psi (2-5BAR).   Only Compatible With:   Alfa Romeo 145 155 156 166 GTV SPIDER Audi 100 80 A2 A3 A4 A6 CABRIOLET COUPE TT Holden COMMODORE Mazda 3 6 CX-7 MX-5 Mitsubishi 3000 GT COLT GTO GALANT LANCER STARION Nissan 180 SX 200 SX 300 ZX GT-R PULSAR SKYLINE Seat IBIZA LEON Subaru FORESTER IMPREZA LIBERTY Toyota CELICA SOARER SUPRA Volkswagen BORA GOLF PASSAT POLO

Read more less