Performance - Audi S3 8P

Forge Motorsport are proud to offer the latest evolution of our popular direct turbo mounting valve for selected petrol turbocharged VAG engines At a glance: Fits 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit FMBGFK3)Billet construction from aerospace grade aluminiumNo fault codes and no check engine lightsFull instructions and all parts necessary for installation included Forge Motorsport offer this valve option for the 1.4T, 1.8T & 2.0T FSI and TSI engines, including the late 2011-2013 2.0 engine fitted with the IHI turbo, (the 1.4T needs additional fitting kit (FMBGFK3) found in a wide range of vehicles from VW, Seat, Skoda and Audi. This valve represents the latest evolution of part number FMFSITVR, The result is a full replacement recirculating valve that integrates seamlessly with the OEM electronics and results in absolutely no fault codes, no check engine lights, and no detriment to the performance of the vehicle in any way. Like our full replacement atmospheric valve option, the FMFSITVR and FMFSITAT is fully engineered to remedy the failure issues experienced with the OEM solenoid valves when their diaphragm may rupture which would effectively result in a boost leak. Our valve uses full billet alloy construction with a piston based internal design that provides for significantly improved reliability over the OEM valves along with lightning fast response. This valve is particularly well suited to the B7 and B8 chassis Audi A4 and A5 with the 2.0T engine. The valve mounting location on these vehicles is positioned particularly close to the frame rail of the chassis, and the overall installed height of our standard replacement valve and spacer combination is such that it conflicts with the chassis at this location. The FMFSITVR valve has a much shorter overall installed height, which enables fitment of this recirculating valve option onto the B7 and B8 chassis whereas this was previously not an option. Another particularly unique feature of this product is the included intake manifold tap used to source a vacuum reference for the operation of the valve. This piece also has two other available provisions from which an intake manifold reference can be taken. These extra manifold references can be used for a boost gauge signal, and even a water/meth injection trigger where applicable. If this to be installed to the 1.4 Turbo engine, it will be necessary to additionally purchase our boost sensor adaptor FMBGFK3 - please see below in Related Products. Note: This will ONLY fit the 1.4 turbo engines up to early 2013, where the turbo is mounted at the front of the engine bay. It will not fit engine codes CMBA & CXSB   In The Box:1 x FMFSITVR Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x PCV Adaptor Kit1 x Blue Spring (Uprated)10 x Cable Ties1 x 2000mm Length of 4mm Vac Hose1 x Instruction Booklet1 x Forge Keyring and Sticker If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below. If you are unsure if this product is suitable for your application, please contact us.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits All Vehicles

Read more less

A Big Brake kit with 6 pot calipers and 356 x 32mm ventilated discs. The discs are grooved to remove braking residuals and maintain optimum performance. Included in the kit are Forge braided brakes hoses, mountings, and brake pads. This kit is suitable for the VW Mk5 Golf including R32, Golf Mk6/Mk7, Audi A3, TTRS, TTS, VW Scirocco, 2013 model VW Beetle, as long as they are fitted with 18inch or larger wheels. If you are running stock VW wheels, you may need to fit a 5mm spacer in order to clear the back of the spokes. To download our fitment template click here. This brake kit is supplied with either our Forge Ceramic Brake Pads (FMBKPAD) or  EBC Yellow Pads. For further information on EBC pads please see EBC website. Depending on your wheel design, you may need spacers between the hub and the wheel in order to clear the calipers. These kits do not have CE / TUV approval and are recommended for race use only Each Caliper weighs 3.25kg Each Disc weighs 9.35kg Torque Settings: Carrier to Hub 260NM Caliper to Carrier 139NM   Colour Code: Dark Blue- ZAK Beam Blue Download our guide on how to clean and maintain your Forge Motorsport Big Brake Kit Please Note: Forge Motorsport or its resellers will not offer any warranty or replacement if brake vibration, abnormal pad wear, caused by uneven discs which has resulted after poor and incorrect installation.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Vehicles

Read more less

A replacement turbo actuator for vehicles based on the MK5 Golf chassis with the 2.0 FSi engine. Forge Motorsport were one of the first company’s in the world to design and manufacture the billet two-piece replacement aluminium turbo actuator. Originally for the Cosworth, Renault 5 GT turbo, and Lancia Integral turbos, we soon developed the largest and most diverse range of actuator replacements. Choice of spring pressures to suit your car Manufactured from 6026 grade aluminium Vehicle specific Turbo specific Built to order Machined and hand polished in the UK Choice of piston or diaphragm operation on most actuators Nomex reinforced flurosilicone diaphragms Laser cut stainless steel brackets (where applicable) Tuning and service kits available Made in England Lifetime warranty* Please Note: The pressure figures listed in the drop-down menu above are minimum regulated pressure figures. If you are unsure, please don't hesitate to call us on 01452 380999.  When you fit a Forge turbo actuator you will be able to fine tune and manage your specific boost requirements, this will allow for improved response and better control. This product is built with a predetermined actuator spring suitable for, or slightly above factory boost levels. The actuator can be assembled with a stronger spring upon request for tuned vehicles, and where a higher boost level is required. Please contact us directly concerning this process. It is designed and built with the intention of increasing the boost output of a turbocharged system. We cannot guarantee compatibility with all applications, nor the ability to increase the boost output beyond a level that is within the parameters set by the engine-management-system of the given vehicle at the time of installation, whether that system is factory or aftermarket Diaphragm sealed internals are the default selection for this actuator product but customers now have the option of piston sealed internals. Unique to Forge Motorsport, this innovation offers equal performance to the diaphragm type and low maintenance due to the hard wearing nature of piston sealed valve internals. Forge Motorsport nor any of its authorised distributors can assume any responsibility for any adverse effects resulting from the installation and tuning of this product onto a vehicle whose engine-management-system, whether factory or aftermarket, is not capable of allowing for the desired level of adjustment. While Forge Motorsport is happy to supply you with an actuator capable of holding boost beyond that of your factory unit we are in no way capable of knowing nor suggesting that your vehicle's engine or related systems are capable of supporting or surviving the stresses of such elevated boost pressure. In The Box:1 x FMACVAG06 Actuator1 x Forge Sticker This actuator is built with a stock spring as standard. If you require the FMPACTUN spring tuning kit seen in the associated products below, you will need to select the Diaphragm Type 2, 049 option.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   Fits Multiple Cars

Read more less

This silicone hose fits the Audi S3, SEAT Leon Cupra and VW Golf ED30 2.0 litre FSiT engines. It runs between the diverter valve (located at the front of the engine) and the air intake (rear of engine). This is available in red, blue, or black.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS MULTIPLE VEHICLES

Read more less

A silicone hose to replace the throttle body hose on the 2.0 litre FSiT engines on Audi, VW, SEAT, and Skoda. Please note this product does not fit the Audi 2.0 tsi 2010 onwardsAvailable in Blue, Black or Red The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS MULTIPLE VEHICLES

Read more less

This Silicone Coolant Hose Kit for 2.0 FSiT comprises of 8 hoses. This product is for FSi models only, it will not fit TSi. The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.   FITS MULTIPLE VEHICLES

Read more less

Forge Motorsport has developed this turbo outlet muffler delete pipe for the 2.0 petrol turbo (TFSI)  (EA113 engine with K04 turbo). It has been designed with 3 points of contact to eliminate any possibility of resonation. This part will improve the sound of your turbo spooling and improve response due to its sleek single billet design that eliminates the restriction and turbulence caused by the OEM part. Complete with flourolined hose and clamps.  This product fits:K04 Golf Mk5 ED30Golf Mk6RScirocco RAudi S3 (8P)   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A High Flow vacuum operated twin piston valve for the Audi S3 (8P model). Designed primarily to ensure that high volumes are discharged quickly, this valve can be configured as either a recirculation valve or a blow off valve. Everything required for the installation is supplied along with comprehensive instructions. We can offer the silicone hose in a choice of Red,Blue or Black, simply select your choice in the options above when ordering.   In The Box:1 x FMDV8PS3 Valve1 x Wiring Harness1 x Solenoid, Bracket, and Screws1 x PCV Adaptor Kit1 x 1000mm of 4mm Vacuum Tube2 x 45mm Hose Clamps2 x 35mm Hose Clamps1 x 25mm Blanking Plug1 x 25mm Side Pipe1 x Straight Silicon Hose (25mm x 65mm)1 x Silicon Hose #11876 x Cable Ties2 x M5 x 35 Self Tapper Screws1 x FMBGFK3 (Vacuum Tap, Gasket, and Bolts)1 x Instructions1 x Forge Sticker   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Scorpion Exhausts Audi S3 8P Non-resonated cat-back system Fits Years 2006 to 2012 Fits to OEM / Scorpion Pipe Diameter 70mm/2.75 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUS074 Product Type Cat-Back Resonated Non-resonated Fitment Years 2006 - 2012 Fits To OEM / Scorpion Model Fitment S3 (8P) Pipe Diameter 70mm/2.75" * Tailpipe Daytona (twin) Tailpipe Diameter 90mm Shipping Dimensions 90cm x 78cm x 26cm OEM Scorpion Change Power Difference 243.3 BHP 259.9 BHP +16.6BHP Weight Difference 17.4 KG 15.6 KG -1.8 KG

Read more less

Scorpion Exhausts Audi S3 8P De-cat downpipe Fits Years 2006 to 2012 Fits to OEM / Scorpion Pipe Diameter 76mm/3 One of the VAG group companies Audi really became noticed as producers of performance road cars in the early 80’s with their release of the legendary Audi Ur Quattro, the world’s first all-wheel drive turbo production car. This was a real game changer which went on to win numerous world rally championships and sowed the seeds for their future high performance road cars. Scorpion has a heritage of producing high quality performance exhausts for these legends of the 80’s through to the highly sought-after performance models available currently.  TRACK TO ROAD ADVANTAGE Our innovation towards performance, packaging and durability keeps Scorpion at the cutting edge of this highest form of production based motorsport.This approach allows customers to share the emotion and thrills of our racing programme in a premium product that can be fitted directly onto your road vehicle. Technical information for SAUC074 Product Type Turbo-Downpipe Fitment Years 2006 - 2012 Fits To OEM / Scorpion Model Fitment S3 (8P) Pipe Diameter 76mm/3" * Shipping Dimensions 120cm x 32cm x 32cm Notes Engine management light may be activated, Stage 2 ECU remap recommended Closed Circuit Product Yes OEM Scorpion Change Weight Difference 11.4 KG 7.5 KG -3.9 KG

Read more less

FRONT SPLITTER AUDI S3 8P (FACELIFT MODEL) fits: AUDI S3 8P (FACELIFT MODEL) 2009-2013   COMPLETE SET CONTAINS:    SPLITTER /FRONT BUMPER LIP SPOILER WITH TIE BARS  Mounting kit   Splitter is in black colour, it's ready for mounting.No need of any additional work, unless you want to paint it for a different colour.Splitter lowers the car visually and improves the grip and vehicle stability.Product is made of ABS plastic. ABS material was created specifically for use in the automotive industry.ABS is used in production of factory bumpers and other car body parts.ABS products are characterized with increased strength and flexibility. This product has been TUV MATERIALGUTACHTEN certified (TUV certify for material).Please Note: Whilst most items are held in stock and we endeavour to have these with you in little time, there will be instances where this item will have to be manufactured to order and shipped directly from the factory in Poland. On these instances shipping can take between 3 and 5 weeks. By placing your order you are agreeing to the possible wait time, and cancellation due to inability to wait is not permitted and may incur an admin fee! If you wish to have the product "ASAP" please check stock levels prior to ordering via email to our support inbox

Read more less

Revo Big Brake Kit UpgradeImproves stopping power under any condition OVERVIEW The Revo Big Brake Kit Upgrade is engineered to improve your stopping power in any condition. Whilst stock brakes are perfectly adequate for general driving; the braking system is often overlooked when enhancing a vehicle's performance. The Revo brake kit is made by world-leading brake manufacturer Alcon; utilising over 30years of motorsport braking innovation only the best materials, techniques and processes have been used. In-depth testing is a key factor in the development of our products; our brake kits have been aggressively tested in a variety of conditions in both road and track scenarios to ensure they meet the constant high stress of track days, sprints and fast road driving. Test kits were installed on our in house development vehicles along with several vehicles around the world and put through their paces to prove their worth over the stock setup; providing exceptional performance combined with consistency and durability you can rely on, corner after corner, stop after stop. Made by world leading brake manufacturer Alcon, only the best materials, techniques and processes have been used, with every step of the manufacturing process completed in the UK. Alcon has been at the forefront of motorsport braking innovation for over 30 years. BENEFITS Low Rotational Mass Improved Pedal Responsiveness Lower Long-term Maintenance Costs Superior Heat Dissipation: Less Prone To Fade Increased Braking Performance On & Off Track 100 - 0 MPH AVERAGE STOPPING DISTANCE CALLIPERS Our lightweight six-pot calliper is a single-piece aluminium Mono-bloc design. This design has been used to maximise rigidity, pedal feel and overall braking performance. The calliper incorporates a progressive six-piston setup to give great brake balance, and high quality seals increasing resilience to road salts and other corrosive elements. DISCS We use a two-piece floating disc and hat design to efficiently dissipate heat. The friction surface features crescent groves designed to increase bite and remove debris from the pad surface giving the perfect balance between brake feel and longevity. The discs feature internal cooling vanes that draw air from the centre of the disc outward to maximise heat dissipation and minimise heat transfer to the callipers, pads, and brake fluid, which plays an all-important part in providing consistent stopping power for your vehicle. BRAKE PADS We supply our brake kit with Ferodo DS Performance Pads that offer a consistent pedal feel and fantastic braking performance both from cold and when hot. Combined with low wheel dusting, minimal noise characteristics, and low disc and pad wear rates this is the ideal pad compound for general road and track driving. BRAKE LINES Our brake kit is supplied with stainless lines; consisting of a PTFE inner and stainless steel braided outer to eliminate the spongy feel of original rubber hoses, provide superior resistance to corrosion, and offer consistent braking performance. BRAKE FLUID Our brakes are supplied with Motul Dot 5.1 brake fluid; specifically designed for brakes systems with ABS. This is a long-life synthetic brake fluid with superior boiling point qualities to conventional Dot 3 and 4 spec. fluids. KIT CONTENTS Revo by Alcon Caliper x2 (3.3 Kg Each) Revo by Alcon Discs x2 (7.66 Kg Each) 6061 Aluminium Anodised Bell x2 6061 Aluminium Anodised Caliper Bracket Revo Stainless Steel Braided Brake Lines Motul Dot 5.1 Brake Fluid Ferodo DS Performance Brake Pads   TECHNICAL DOCUMENTS The following documents are available to view: FITTING TEMPLATE Download the Revo Big Brake Printable 355mm Disc Template. See if the Big Brake kits will fit inside your wheels. FITTING TEMPLATE Download the Revo Big Brake Printable 380mm Disc Template. See if the Big Brake kits will fit inside your wheels.   FITTING      Manufacturer Model Engine Year Audi A3 (8P) All 2003-2012 Audi S3 (8P) 2.0 TFSI 2003-2012 Seat Leon MK2 All 2005-2012 Skoda Octavia Mk2  All 2004-2013 VW Golf MK5/6 All 2003-2012 VW Scirocco All 2003-2012   Notes: Recommended Revo Authorised Dealer Fitment only Please contact your local Revo Authorised Dealer for additional information and availability. © Revo

Read more less