Oil Catch Cans

Protect your engine by preventing excessive crankcase oil vapor entering the intake and carbon build up with LEYO Oil Catch Can Kit. Also known as blow-by, oil vapor is produced under load, spirit driving elevates oil vapor level at an incredible rate, it is then circulated back into the intake tract resulting in carbon buildup of the intake valve, trapped oil residuals in both intake tract and intercooler. Unfiltered recirculated oil vapor will not only diminish performance, but also impose devastating effect to the engine. Filtration begins immediately as oil vapor enters the uniquely designed LEYO Oil Catch Can filtration system, allowing pressurized oil vapor to enter freely, accelerates condensation, effectively traps oil with specially designed perforated stainless steel plates before cleaner gases recirculates back into the intake tract. Made with T304 stainless steel and high grade aluminum ensuring rust free, leak free operation. LEYO R&D team had also included exclusive glass openings for visual indication of waste oil level, with pre-installed drain valve, protecting your pride and joy has never been easier. Specifications: Installs under factory engine cover Uniquely designed filtration system Pre-installed drain valve for easy draining New 'V2' Kit with Dipstick. Notes: If your car has the washer bottle behind the left hand headlamp (looking at the car from the front) you will need the kit with the Washer Neck Relocation

Read more less

Tuning levels on the Focus RS & ST have pushed the standard Ford oil filter housing to its limit, with the fagile diaphragm inside these housings splitting and also leaking due to the clip on design, a upgraded breather system was required, the AIRTEC Motorsport two-piece breather kit ticks all the boxes and more... The AIRTEC Motorsport two-piece breather kit includes the following: 1 x Modified & Baffled Ford oil filter housing, includes new oil filter element and oil seals for no fuss fitting 1 x AIRTEC Motorsport oil separator with billet mounting block and laser cut fitting washer that also doubles up as a template when drilling to attach separator to battery tray 5 x Pro Hoses oil resistant fluorosilicon lined hoses, custom made to fit your engine bay, far superior fitting than straight hoses and available in various colours to match your engine bay. Complete with full stainless steel chunky jubilee clips, very minor trimming of hoses may be required.  1 x Mini breather and alloy joiner, this attaches to bottom of oil separator hose which runs down back of engine and secures to the gearbox with a modified stainless 'P' clip, its positioned so any engine fumes exit underneath the floor pan   Exchange - we require your old oil filter housing before sending 2 piece breather kit. Once you have purchased, a kit will be allocated for you, when we have received your old ford oil filter housing we can send your new 2 piece AS breather kit Outright - you will receive full kit & if you wish to return your old oil filter housing we will refund you £149. This is good for international customers that can't send their old unit back & customers that wish to fit first and then return after installation Other colour hoses are available please state when ordering Please Note: Kawasaki Green is a brighter Green than Ultimate Green (FRS Green)

Read more less

The Racingline Performance Oil Catch Tank & Oil Management System is the ultimate oil separating catch can system for MQB EA888 Gen3 2.0T engine cars. Not all catch cans are created equal. The Racingline Performance system has a dual function: as well as routing undesirable oil and moisture vapours through a sophisticated system of internal baffles and a fully baffled catch can, the Racingline Performance Oil Catch Can System also takes our track & motorsport experience of these engines to correct the problem of oil build-up in the top of the engine during high-G braking. The kit includes our Engine Breather Plate – just as the Golf and SEAT TCR EA888 touring cars use to avoid the oil surge issue. So not only does the Racingline Peformance Oil Management System condense these vapours into the bottom of the tank, keeping a purer air/fuel mixture and avoiding the problem of slowly filling intercooler and intake pipework with oil. The Engine Breather Plate included in the kit also protects your engine by helping to eradicate oil starvation in very high G braking – an issue when used on track, leading to several engine failures in Racingline Performance UK’s testing experience. Confirmed Fitment Please note, this information is a combination of supplier provided compatibility data and our workshop expertise, derived through experience or testing on EU manufactured vehicles unless stated. While every effort has been made to ensure the accuracy of this information we cannot be held liable for abnormalities or inaccurate data. For more information please see our Terms & Conditions under the legal section. MAKE MODEL VARIANT/ENGINE MAKE MODEL VARIANT/ENGINE Audi A3 (8V) 2012-present Audi S3 (8V) 2012-present Seat Leon (3rd gen) 2013-present Skoda Octavia (3rd gen) 2013-present Volkswagen Golf Mk7 2012-present

Read more less

Here we present FMCT5, a twin catch can and coolant expansion tank system. This design has been subject to a vast amount of development and is a one of a kind product in the marketplace.  The FMCT5 is a direct replacement for the OE coolant expansion tank. The CAD laser cut alloy construction is skilfully welded at Forge UK HQ. The expansion tank has a level indicator inside the filler neck, to make topping up easier, we have also machined a cap cover that slots over the top of the OEM cap to add to the premium look. The twin catch can system is the definitive solution to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one, we recommend, particularly if you are planning more advanced power tuning in the future.  Our system filters both PCV and intake breather systems to help keep your engine clean from harmful contaminants, including oil deposits, unused fuel vapours and moisture, which would ordinarily make their way back through to the inlet of the engine. All of this is now collected in the catch cans. There is a dip stick for each tank to measure the amount of deposit caught, this opening can also be used to pump out the captured contaminants or alternately you can use the drain plugs at the bottom of the tanks. As with all Forge Motorsport products we have used superior braided hoses which are internally constructed from anti-static smooth fuel resistant nitrile rubber. This is combined with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F). The FMCT5 is available in raw aluminium finish or our stealthy textured black powder coat finish. Highlights A drain plug for ease of emptying Coolant level indicator Integrated dipstick’s for simple level inspection CNC machined anodised coolant cap cover Premium Quality stainless steel reinforced oil resistant hoses with black external braiding Inner tube is constructed from anti-static smooth fuel resistant nitrile rubber Outer cover is constructed from reinforced Stainless-Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapse Temperature Range: -54°C to +150°C (-65°F to 300°F) The engine cover can still be fitted after installation Installation is straight forward with all necessary fittings and Forge detailed instructions included.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This fits vehicles with a Charcoal Filter Installed. Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system. This oil catch tank system removes aerated oil so that it can be drained and recycled. The kit is suitable for intallation to the 2 litre FSi engines such as in the VW MK5 Golf , MK5 Golf Edition 30 and SEAT Leon Cupra (not for engine codes CCTA CBFA).  Depending on geographic location certain models listed in the compatible vehicles drop down menu are fitted with a charcoal filter to meet local emissions regulations. The filter is located at the front of the engine bay (on the left as you open the bonnet); also see black plastic canister in the engine bay image shown above. This kit with part number FMMK5CTC is for models fitted with the charcoal filter. If you do not have the charcoal filter as standard an alternative catch tank kit is available under the product code FMMK5CT. Please contact us by email or phone if you are unsure of which kit is compatible with your model. We now have an updated version of this part available, please note it only fits the Golf mk5. If you would like our updated version please click here.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is by far the most complete oil collection system currently on the market. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. Extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the Golf Mk5 GTI's TSI engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any Mk5 GTI owner seriously consider, particularly if they are planning more advanced power tuning at a later date.   The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection.   The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F)   Finally, the kit features a pair of stainless steel reinforced oil resistant hoses with black external braiding, which combine with the supplied fittings to form an OEM-looking product when installed. Highlights 0.4L capacity* A dipstick for simple level inspection. 2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look. Fully assembled with fittings to suit the OEM connections. Inner tube is constructed from anti-static smooth fuel resistant nitrile rubber Outer cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapse Temperature Range: -54°C to +150°C (-65°F to 300°F) Installation is straight forward with all necessary fittings and instructions included. Please note that the engine cover will not fit with this kit without modification              *Dipstick level is set at less than 0.4L for optimum breathing.       Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This oil catch tank kit is for the Toyota Supra A90 and BMW Z4 with the BMW B58 Engine, developed by our in-house development team. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. When the B58 engine is tuned heavily blow by can occur resulting in poor breathing our specifically designed catch can system and extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend, particularly if you are planning more advanced power tuning at a later date. With aesthetics also in mind our catch can has the bracket incorporated into the catch can lid and is placed behind the factory airbox heat shield meaning this important component can still be kept in situ. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection. The design of the breather adaptor and catch can was formed using the latest 3D solidworks software and engineered for a complete plug and play solution with no cutting or modifying of original components meaning the vehicle can return to stock in just under a hour. The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F) Finally, this kit includes machined billet fittings that are anodised black to form an OEM-looking product when installed.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A silicone hose to replace the throttle body hose on the 2.0 litre Scirocco. Available in blue, black, or red.   The Forge silicone hoses in this kit have been designed to include an expensive inner liner of modified silicone known as Fluorosilicone. This means the hoses are suitable to be used with  either modern long-life coolants, Organic Acid Technology coolants (O.A.T.) or air containing oil mist. The construction of the hoses has been engineered to exceed that of the OEM fitments, and will enhance any engine bay both technically and aesthetically The use of a Fluorosilicone liner ensures that Forge silicone hoses are the clear market leader. Lifetime warranty*   *T&C’s apply   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This oil catch tank kit is the product of many months of intensive research and development by our in-house development team, and the end result is by far the most complete oil collection system currently on the market. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. Extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the Tiguan 2.0 TSI engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend any owner seriously consider, particularly if they are planning more advanced power tuning at a later date. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap. The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F) Finally, the kit features a pair of stainless steel reinforced oil resistant hoses with black external braiding, which combine with the supplied fittings to form an OEM-looking product when installed, so much so that the engine cover can still be clipped into place!   Highlights 0.4L capacity*A drain tap for ease of emptyingA dipstick for simple level inspection2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous lookFully assembled with fittings to suit the OEM connectionsInner tube is constructed from anti-static smooth fuel resistant nitrile rubberOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapseTemperature Range: -54°C to +150°C (-65°F to 300°F)The engine cover can still be fitted after installationInstallation is straight forward with all necessary fittings and instructions included *Dipstick level is set at less than 0.4L for optimum breathing.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This oil catch tank kit is for the Audi TTRS 8S and Audi RS3 2017-on, developed by our in-house development team. Not only is it beautifully designed, it has been created to capture the maximum amount of harmful contaminants, including oil deposits, unused fuel vapours and moisture, all of which would ordinarily make their way back through to the inlet of the engine. Extensive testing has proven our oil catch tank kit's ability to effectively reduce sludge and carbon build up, in turn allowing the engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend, particularly if you are planning more advanced power tuning at a later date. The 0.4l (400cc) catch tank boasts a collection of features intended to make it both easy to check and simple to drain, including a dipstick for level inspection and a well placed drain tap. The design of the kit has also been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement in order for the tank to be resistant to both pressure expansion and vacuum collapse, and also to enable the kit to function within a clearly defined temperature range – 54°C to +150°C (-65°F to 300°F) Finally, this kit includes machined billet fittings that are anodised black to form an OEM-looking product when installed. Please note: We have found that on some late RS3 and TTRS models from 2019 onwards an additional breather has been added to the PCV. If your engine has the additional breather the catch can will NOT fit. To check this, remove your vehicles engine cover and check the visible PCV unit. Additional Breather No Additional Breather   Highlights 0.4L capacity*A drain tap for ease of emptyingA dipstick for simple level inspection2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous lookInner tube is constructed from anti-static smooth fuel resistant nitrile rubberOuter cover is constructed from reinforced Stainless Steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapseTemperature Range: -54°C to +150°C (-65°F to 300°F)The engine cover can still be fitted after installationInstallation is straight forward with all necessary fittings and instructions included *Dipstick level is set at less than 0.4L for optimum breathing.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Excess crankcase pressure is vented from the crankcase through the PCV system, where it is drawn into the intake manifold and returned by the engine. This recirculated air contains aerated oil from the crankcase which is burned by the engine. Turbo charged engines often draw significant amounts of oil into the engine through the PCV system.  This oil catch tank system removes aerated oil so that it can be drained and recycled. The kit is suitable for intallation to the 2 litre FSi engines such as in the VW MK5 Golf , MK5 Golf Edition 30 and SEAT Leon Cupra (not for engine codes CCTA CBFA). Depending on geographic location certain models listed in the compatible vehicles drop down menu are fitted with a charcoal filter to meet local emissions regulations. The filter is located at the front of the engine bay (on the left as you open the bonnet); also see black plastic canister in the engine bay image shown above. This kit with part number FMMK5CT is for models not fitted with the charcoal filter. If you do have the charcoal filter as standard an alternative catch tank kit is available under the product code FMMK5CTC. Please contact us by email or phone if you are unsure of which kit is compatible with your model.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Following on from the success of our billet catch can kit for the Golf Mk5 and Golf Mk6, we are pleased to present another of our latest kits for the Golf Mk7R and Audi S3. If your engine bay looks like the image below, you will need to also purchase the washer bottle. This can be selected on the drop down menu above.  If your engine bay looks like the image below you do not need to purchase the washer bottle. In house testing has proven our oil catch can kit's ability to effectively reduce sludge and carbon build up, allowing the Golf Mk7R and Audi S3 engine to both breathe and perform more efficiently. It can therefore be viewed as a genuine performance enhancing product and one we recommend to any owner to seriously consider, particularly if they are planning more advanced power tuning later. The 0.4l (400cc) catch tank boasts a slew of features intended to make it both easy to check and simple to drain. Included is a dipstick for level inspection and a well-placed drain tap. Throughout the development of this product the design has been carefully considered, hence its inner tube which is constructed from anti-static smooth fuel resistant nitrile rubber. This is paired with an outer cover made from reinforced stainless-steel wire braid (a Forge specialty), specifically a partial inner braid and a full cover outer braid. We developed this complex arrangement for the tank to be resistant to both pressure expansion and vacuum collapse, and to enable the kit to function within a clearly defined temperature range -54°C to +150°C (-65°F to +300°F) The black external hose braiding and push fit fittings form an OEM-looking product when installed.   Highlights 0.4L capacity* A drain tap for ease of emptying A dipstick for simple level inspection 2 Quality stainless steel reinforced oil resistant hoses with black external braiding for that inconspicuous look Fully assembled with fittings to suit the OEM connections Inner tube is constructed from anti-static smooth fuel resistant nitrile rubber Outer cover is constructed from reinforced stainless-steel wire braid consisting of partial inner braid & full cover outer braiding which is resistant to pressure expansion and vacuum collapse Temperature Range: -54°C to +150°C (-65°F to 300°F) The engine cover does not need to be removed Installation is straight forward and all the necessary fittings and instructions included You will not need to modify any original equipment which means this kit is fully reversible.            *Dipstick level is set at less than 0.4L for optimum breathing.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less