Filters

BMW M3 | M4 replacement air filter is designed to improve air flow through the standard airbox.  This item doesn't have to be removed and thrown away during service intervals.  Due to the construction, the filter can be cleaned and reoiled during maintenance.  ITG Airfilters BMW M3 and M4 F80/F82 (Two Filters Supplied) HMP814 Our unique Tri-Foam® system with three layers of foam combined with the arresting stickiness of the dust retaining oil gives a high level of filtration to protect the engine from all containments brought in by the air. More power Performance is unaffected by very large quantities of dirt arrested in the filter and, long after ordinary filters have blocked up and reduced the engine power, loss of pressure in the Profilter airflow will be exceptionally low. Longer life In normal road use, a Profilter will last at least four times as long as the equivalent standard filter. Waste is reduced so Profilter helps the environment as well as the engine. Engine Code: S55B30 BHP 431 Filter Size: Handed Filters Quantity: x2 Supplied dyno proven to increase power by 20bhp

Read more less

BMW M135i | M235i | M2 replacement air filter is designed to improve airflow through the standard airbox.  We have tested the replacement ITG air filter on a stock BMW M135i running 99ron fuel. The vehicle produced 301whp and 306ftlb before the filter was installed. Once the filter was replaced with the ITG Pro Filter the vehicle picked up an additional 6ftlb over standard.  This item doesn't have to be removed and thrown away during service intervals.  Due to the construction, the filter can be cleaned and reoiled during maintenance.   Stock BMW M135 Auto | V Power BMW M135i | Auto | V Power | ITG Panel filter | Comparison dyno graph   Product Specification Engine Code: N55B30A BHP 320, 326 Filter Size: 268 x 218 Part Number: HMP-795 Quantity: 1 Looking for a power increase? check out our BMW VUDU V420r package

Read more less

ITG Maxogen Air Filter JC62 Conical ITG JC62 Maxogen Conical foam air filter with spun aluminium neck. The JC62 range of ITG Air Filters are identified by the internal diameter of the aluminium spinning. The wall thickness of the spinning is 1.5mm. So for example, if you select a JC62 air filter with 60mm internal diameter (I.D.) it will have 63mm outside diameter (O.D.).These filters are available with two aluminium spinning sizes, 60mm or 70mm I.D.. Please select your required spinning size from the drop down menu above before placing the item in your basket.For dimensions and power ratings of JC62 Air Filters, please click on the Technical Info tab above the product image.

Read more less

ITG Maxogen Air Filter JC60 with Rubber Neck ITG JC60RN Maxogen Fully Coned Cylindrical foam air filter with rubber neck. A new development from ITG, these new JC60 Maxogen air filters feature a rubber neck, ideally suited for when fitting an air filter straight on to a MAF housing or solid pipe. Dimensions for the JC60RN air filters are:-Dimension C: 147mmDimension D: 27mmDimension F: 145mmDimension G: 108mmRated to approximately 290BHP.These JC60RN air filters are available with 3 differing internal neck diameters (dimension A) either 70mm, 76mm or 79mm. Please select your required neck size from the drop down menu above before placing the item in your basket.

Read more less

ITG Maxogen Air Filter JC60 Cylindrical ITG JC60 & JC62 Maxogen Air Filters. These universal air filters have been developed by ITG to offer superior filtration. The JC60 and JC62 air filters are available in many varying sizes, please click on individual product pages for all available options.ITG JC60 Maxogen Cylindrical foam air filter with spun aluminium neck. The JC60 range of ITG Air Filters are identified by the internal diameter of the aluminium spinning. The wall thickness of the spinning is 1.5mm. So for example, if you select a JC60 air filter with 60mm internal diameter (I.D.) it will have 63mm outside diameter (O.D.).These filters are available with aluminium spinning sizes from 58mm up to 149mm. Please select your required spinning size from the drop down menu above before placing the item in your basket.

Read more less

ITG Maxogen Air Filter JC60 Fully Coned ITG JC60FC Maxogen Fully Coned Cylindrical foam air filter with spun aluminium neck. The JC60 range of ITG Air Filters are identified by the internal diameter of the aluminium spinning. The wall thickness of the spinning is 1.5mm. So for example, if you select a JC60FC air filter with 60mm internal diameter (I.D.) it will have 63mm outside diameter (O.D.).These filters are available with aluminium spinning sizes from 58mm up to 99mm. Please select your required spinning size from the drop down menu above before placing the item in your basket. These filters are available with aluminium spinning sizes from 58mm up to 149mm. Please select your required spinning size from the drop down menu above before placing the item in your basket.

Read more less

ITG JDR1 Air Filter Dust Retention Spray - JDR1 ITG Dust Retention Spray. Used after Air filter has been cleaned to keep dust at out of the air filter. 400ml can. PLEASE NOTE: Due to this product containing an aerosol, we are unable to send ship this item outside of the UK  

Read more less

ITG Maxogen Air Filter JC60 Cylindrical ITG JC60 & JC62 Maxogen Air Filters. These universal air filters have been developed by ITG to offer superior filtration. The JC60 and JC62 air filters are available in many varying sizes, please click on individual product pages for all available options.ITG JC60 Maxogen Cylindrical foam air filter with spun aluminium neck. The JC60 range of ITG Air Filters are identified by the internal diameter of the aluminium spinning. The wall thickness of the spinning is 1.5mm. So for example, if you select a JC60 air filter with 60mm internal diameter (I.D.) it will have 63mm outside diameter (O.D.).These filters are available with aluminium spinning sizes from 58mm up to 149mm. Please select your required spinning size from the drop down menu above before placing the item in your basket.

Read more less

ITG Maxogen Air Filter JC60 Coned ITG JC60 & JC62 Maxogen Air Filters. These universal air filters have been developed by ITG to offer superior filtration. The JC60 and JC62 air filters are available in many varying sizes, please click on individual product pages for all available options. ITG JC60C Maxogen Coned Cylindrical foam air filter with spun aluminium neck. The JC60 range of ITG Air Filters are identified by the internal diameter of the aluminium spinning. The wall thickness of the spinning is 1.5mm. So for example, if you select a JC60C air filter with 60mm internal diameter (I.D.) it will have 63mm outside diameter (O.D.).These filters are available with aluminium spinning sizes from 58mm up to 149mm. Please select your required spinning size from the drop down menu above before placing the item in your basket.

Read more less

The ITG induction kit for the Fiat 500 Abarth completely replaces the OEM intake system.  The ITG kit sources cool air from behind the scuttle panel, well away from any power robbing heat under the bonnet. Testing has shown gains of 16hp over the standard induction system on a re-mapped car. Aside from the increase in power, there are improvements' with throttle response and a pleasing, yet unobtrusive increase in intake Noise.

Read more less

ITG Trumpet Socks ITG Foam Sock small JCS11. This foam sock from ITG is designed to fit over the bellmouth of a carburettor. Filter measures 95mm outside diameter by 125mm long.

Read more less

Designed as a direct replacement. ITG Air Filter - Performance filter to fit FIAT Fiat 500 Abarth(1.4 Turbo (08/08>) - WB-206

Read more less