Filters

This intake is designed for RHD vehicles and will NOT fit the LHD version. For the LHD, see here. Forge are excited to present our Hi flow intake system for the Suzuki Swift Sport. Many months and man hours of development have gone into this product to achieve our three main objectives: Increase power and torque output Improve the sound characteristics of the engine note Improve the visual impact of the engine bay During our testing, we found that the location of the original air box was susceptible to a vast amount of heat soak. This is because the airbox air feed is placed directly above a very hot source of heat - the radiator. This led us to design and relocate where the air filter/airbox is housed in the engine bay. The Forge cold air intake system now cleverly draws air from within the Suzuki Swifts front bumper keeping the intake temperatures extra cool in any climate. After extensive testing, we found that our carbon fibre canister filters worked the best. The filter element itself is provided by Pipercross, and is fully serviceable or replaceable if necessary. The pipe work of the kit runs around the cold side of the engine and away from the engines turbo manifold; this again is to keep intake temperatures down as low as possible. In total, we observed intake temperatures fall from 39°C down to 26°C. These numbers will come down further still with the addition of our intercooler upgrade.  The Forge High Flow airbox produced an impressive increase of over 8BHP at 5500RPM and a gain of toruqe throughout the entire rev range on independent dyno testing. The design of this kit has also introduced some excitement to the driving experience with a subtle yet characterful induction roar when on harder acceleration.       You will be very happy with the visual impact of the kit upon opening the bonnet. Every part of the kit from the handmade aluminium hard pipe to the bespoke silicone hose and the carbon fibre filter both look and feel high quality - quite simply, because they are!   The kit comes complete with everything you need for installation, which can be carried out in around 40 minutes, including a set of full colour instructions. "Well what can I say? This induction kit is absolutely brilliant! The looks, the noise and power difference is unbelievable. The carbon fibre just finishes off the engine bay. The noise well is more than I expected sounds brilliant, it really does 'suck' and 'hiss' absolutely brilliant from a induction kit. The power difference is really noticeable when boosting its harder and harsher and just pulls.Another great product from forge"   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This intake is designed for LHD vehicles and will NOT fit the RHD version. For the RHD, see here. After the success of our Intake system for the RHD Suzuki swift Sport (ZC33S), due to popular demand we wanted to give LHD swift owners an equivalent aftermarket intake filtration system. Several months of testing have been spent developing a kit with all the same qualities of our FMINDK29 kit which are: Increase power and torque output Improve the sound characteristics of the engine note Improve the visual impact of the engine bay During our testing, we found that the location of the original air box was susceptible to a vast amount of heat soak, which lead us to relocate the location of where the air filter/airbox should be located in the engine bay. After extensive testing, we found that our carbon fibre canister filters worked the best. The filter element itself is provided by Pipercross, and is fully serviceable or replaceable if necessary. The pipe work of the kit runs around the cold side of the engine, this again is to keep intake temperatures down as low as possible. In total, we observed intake temperatures fall from 32°C down to 26°C. These numbers will come down further still with the addition of our intercooler upgrade.  Utilizing the superb 100% carbon fibre cannister and Forge High Flow filter we unleashed an impressive 6bhp increase on independent dyno testing. The design of this kit has also introduced some excitement to the driving experience with a subtle yet characterful induction roar when on harder acceleration.     You will be very happy with the visual impact with the kit upon opening the bonnet. Every part of the kit from the handmade aluminium hard pipe to the bespoke silicon hose and the carbon fibre filter both look and feel high quality - quite simply, because they are! The kit comes complete with everything you need for installation on LHD vehicles, which can be carried out in around 40 minutes, including a set of full colour instructions.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

Replacement Filter for: FMINDDS3FMINDK15FMINDK30 Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacement Pipercross filter that fits the FMINDK4 intake. These have been created exclusively for Forge by filtration gurus Pipercross and feature the latest multilayer-foam technology. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* The filter should be installed with a maximum clamp torque pressure of 3nm.Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacement Pipercross filter that fits the FMINDK20 intake. These have been created exclusively for Forge by filtration gurus Pipercross and feature the latest multilayer-foam technology. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This kit is specifically designed for the Renault Clio RS200 Turbo. We use a custom designed silicone hose combined with a non-oiled cotton gauze high flow cone filter offering excellent filtration. Everything needed is supplied in the kit, including quality stainless steel clamps. Testing of this kit showed improvements of 4 horsepower over the stock air box on a standard engine. Greater improvements can be achieved on tuned vehicles.  You have a choice of black or blue silicone hose, please select your choice using the options above. For replacement filter follow this link: http://www.forgemotorsport.co.uk/Replacement_Filter_for_FMIND2RCT--product--1615.html   PLEASE NOTE: THIS WILL NOT FIT THE TROPHY 220 MODEL AND THE PHASE 2 1.6 TURBO CLIO Click here to see FMIND3RCTY which fits these vehicles If you are unsure if this product is suitable for your application, please contact us.  Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This kit is specifically designed for the Renault Clio Trophy 220 model. We use a custom designed silicone hose combined with a Pipercoss high flow, foam, cone filter offering excellent filtration. Everything needed is supplied in the kit, including quality stainless steel clamps. Testing of this kit showed improvements of more than 5 horsepower over the stock air box on a standard engine. Greater improvements can be achieved on tuned vehicles. You have a choice of black, blue or red silicone hose, please select your choice using the options above. For the replacement filter for this kit, please see FMRFC7004-1   In the box: 1 x Pipecross Air Filter1 x Silicone Hose 1 x 70-90mm Hose Clamp1 x 60-80mm Hose Clamp Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Forge Motorsport intake kit is for the SKODA FABIA 1.0 TSI 2017 onwards This intake kit includes a bespoke aluminium housing, powder coated black for that OEM look and hard wearing finish. This has a dual purpose of drawing air from the cold air inlet on the slam panel and shielding that cold air from the heat of the engine. The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of 3 colours; black, red or blue. Please select colour from the drop-down list. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any engine bay both technically and aesthetically Lifetime warranty* The filter is manufactured to Forge’s specifications by Pipercross Washable and reusable design. Layered multi-density foam technology. Designed and manufactured in Great Britain. Improvement in engine power and torque with superior engine protection from dirt and dust ingress. Designed to flow stronger for longer. Fitting is straightforward and can be completed in 20-30 minutes. This kit requires no cutting or modification to the vehicle, allowing it to be reversed back to stock. *Please note - the Pipercross filter is excluded from the Forge lifetime warranty* Please watch our video on how to fit an air filter without damaging it.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

High flow foam construction with a foam top for increased surface area and an inner cage for support. Replaces the filter in the following kits - FMINDK26 FMINDF56   Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This is a replacment filter for the FMINDK28 induction kit that is for the Hyundai i30N/Veloster N.   Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

This Induction Kit for The BMW Mini Cooper S (R56 models, 2007 on models) replaces the original filter and air box to improve the breathing of your engine. Unlike many aftermarket induction kits, this kit maintains the intake of colder air from the front of the vehicle to ensure that performance gains achieved through using a free flowing filter are not lost by drawing in warmer air from the engine bay. Users of this kit have reported back on the ease of installation aswell as a sportier sound without being obtrusive. Please note this only fits the earlier N14 engine (2007-2012) and not the later N18 engine. Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less

A complete induction kit for the VW Polo 1.4 GTI. Fitment of this kit will unleash the power that is being restricted by the OEM air box, improving the breathing of your engine. Unlike many aftermarket induction kits, this kit maintains the intake of Cold air to ensure that performance gains achieved through using a free flowing filter are not lost by drawing in warmer air from the engine bay.Users of this kit have reported back on the ease of installation and a sportier sound without being obtrusive. The benefit of installing this kit is even greater on mapped vehicles, when the OEM filtration system becomes a limiting factor to performance gains. Please watch our video on how to fit an air filter without damaging it.     Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.

Read more less