Filters

TECHNICAL DATA Transform your Astra J VXR with the AIRTEC Motorsport induction kit. Features: Removes ugly original plastic & restrictive airbox Adds power and torque, more responsive and exciting driving experience Enhanced induction sound and wastegate chatter Polyurethane mounting bush Powder coated in Pro-series satin black Adds style to your engine bay Easy fitting, takes less than 10 minutes to install Conclusion – It’s easy to fit, looks great, sounds even better, doesn’t cost the earth and can be put back to standard within 10 minutes (warranty) Kit supplied with free clips for fitting. With upgraded Pro Hoses silicone induction hose. AS good AS it gets. Comes with 24 month warranty ‘conditions apply’ Dyno proven by WG Motorworks 336.6 BHP  with the Airtec induction kit. 336.6bhp 390lbft “Only modifications are 3″ Piper Exhausts Decat, AIRTEC Induction kit and Remap. Seeing 50bhp over stock” – Warren, WG Motorworks Registered Design Right number: 6033431

Read more less

AIRTEC Motorsport Group A Filter for Focus ST Mk2 A simple yet hugely effective modification that transforms any Focus ST with a fantastic increase in induction noise, turbo/wastegate chatter and a noticeable improvement in throttle response. Easy to fit, it removes the stock airbox entirely, allowing a cleaner and better looking engine bay too. A great addition to any ST, the kit fits all pre-face lift and face lift models and comes with all fixtures and fittings, including silicone hose connector and an RS-type ECU cover. To make the most of the huge Group A cone filter, there is also the option to add a cold air feed scoop, which helps direct air flow to the filter and also doubles up as a protection if you have RS bonnet vents fitted. Features: 1x huge Group ‘A’ 80mm foam cone filter 1 x pair of custom made silicone Pro Hoses joiners 4x stainless-steel jubilee clips AIRTEC RS-type ECU cover included AIRTEC part no: ATIKFO30

Read more less

Small Group A style cotton air filter, to fit multiple different applications. Fits the following models: Focus Mk2 RS Stage 2 Carbon Fibre CAIS induction kit Focus Mk2 ST225 CAIS induction kit Focus Mk2 ST225 Group A induction kit Choose from AIRTEC spec cotton filter or genuine K&N replacement filter. *Please note, K&N RU-2800 will fit Focus ST225 Group A induction kit ONLY TRUMPET NOT INCLUDED

Read more less

AIRTEC Motorsport induction kit for Meglio (Megane Powered Clio) This complete package offers an easy, simple induction kit upgrade solution for a Renault Megane turbo converted Clio. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for a Megane engine swapped Clio 197. Features AIRTEC foam air filter, hard pipe, Pro Hoses silicone connector and laser cut heat shield. Supplied complete with all fixtures and fittings for an easy and professional installation. Offers improved air flow, better heat management and increased power in a direct replacement solution. The kit does require the battery to be re-located to install. Hard pipe finished in Natural Silver only and heat shield finished in Pro-Series black only. Please note, will not fit left hand drive cars. NOTE – Optional breather tank does not come with this kit. Gloss Black, Race Red, Performance Blue normally kept in stock.

Read more less

AutoSpecialists Focus ST Carbon Fibre look Gen2 CAIS 'Cold Air Induction System' Gain 10 - 18 bhp depending on spec of your ST. 12 Month's of Proto types & testing has produced a Real Quality and Unbeatable value for money product. Our Gen1 CAIS worked great and feel it was the best value CAIS Money could buy and now we have gone that step further by making a bigger and better CAIS our New Gen2 version. Kit includes, Everything you will need to be able to fit. 'Apart from Tools' 1x CAIS canister with Carbo fibre look end section, CNC billet pipe flange fitting and Red cotton conical style filtter Element. 3x Blue,Black, Orange or Red High Pressure Silicon hoses with the highest quality 100% stainless steel jubilee clips. 1x Black Powder coated CAIS canister mounting cradle with stainless fittings 1x ECU relocation brackets, these brackets safely relocate your ECU behind the n/s/f Head light 1x Colour, Step by step fitting instuctions. Fitting should take approx 3-4 hours depending on Tools and Mechanical skill.  Slightly Deeper induction noise over Standard , Gain Power and enhance the look of your Engine bay with a AutoSpecialists Gen2 CAIS.

Read more less

The new AIRTEC Motorsport induction kit that works perfectly with the standard 1.5 ST MK2 Puma. Expect to see gains of 5-10bhp compared to the original Airbox. Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off. Add a pro Silicone Hose - Price includes hose clamps Features: Removes ugly original plastic & restrictive airbox Adds power and torque  more responsive and exciting driving experience Enhanced induction sound and turbo recirculation noise (dumpvalve 'psssh') free flowing Airfilter & optional k&n dry charger filter cover CNC maf sensor boss Powder coated alloy heat-shield with 80mm cold feed pipe which directs air to bottom of filter Cold feed pipe, secure to bottom of heat-shield and secures to lower boost hose, or attach to front lower bumper as shown in the photo Adds style to your engine bay Easy fitting, takes less than 15-20 minutes to install It's easy to fit, looks great, sounds even better, doesn't cost the earth and can be put back to standard within 10 minutes (warranty) A simple modifcation that transforms the look of your engine bay.   Please note: during busy periods silicone hoses may need to be made to order and as a result this delay could be 10-14 days. Please take this into consideration prior to ordering!   

Read more less

AIRTEC Motorsport induction kit and breather tank combo for Meglio (Megane powered Clio) This complete package offers an easy, simple induction kit upgrade solution together with improved engine oil breather for a Renault Megane turbo converted Clio. Fits Clio 197 without factory air-con fitted (or air-con delete kit fitted). Designed and tested in-house at AIRTEC HQ, tested at many UK track days & at the Nürburgring. A must have for a Megane engine swapped Clio 197. The induction kit features an AIRTEC foam air filter, hard pipe, Pro Hoses silicone connector and laser cut heat shield which together offers improved air flow, better heat management and increased power in a direct replacement solution. The kit does require the battery to be re-located to install. The engine oil breather kit features Pro Hoses silicone connectors and a custom made baffled breather tank that vents to atmosphere through a mini filter and allows the engine to breathe more freely. Supplied complete with all fixtures and fittings for an easy and professional installation.

Read more less

TECHNICAL DATA AIRTEC spec replacement air filters designed to suit a range of different AIRTEC induction kits. We have worked with a leading brand to create our ideal spec foam air filters to increase performance, enhance sound and look great under the bonnet! Please see below for model applications and then chose from the drop down menu for the correct filter. AIRTEC-CC-175-70: Fiesta Mk7 1.6 ST180 Stage 2 & Stage 3 induction kit Fiesta Mk8 1.5 ST200 induction kit AIRTEC-CC-501-70: Fiesta Mk7 1.0L EcoBoost Stage 2 induction kit Fiesta Mk8 1.0L EcoBoost induction kit Renault Clio 200/220 EDC induction kit(s) Renault Meglio (Megane Powered Clio) induction kit Renault Megane RS250 induction kit AIRTEC-CC-175-80: MQB 1.8T/2.0T EA888 induction kit (Golf R, Audi S3 8V etc.) Vauxhall Astra H VXR induction kit Mini F56 JCW induction kit Ford S-Max 2.5T induction kit AIRTEC-CC-175-90: Vauxhall Astra J VXR induction kit AIRTEC-CC-107L-JS: Nissan R35 GT-R induction kit AIRTEC-RP-902: Mercedes A45 AMG induction kit

Read more less

K&N's 57S Filter element only, is supplied with a rubber bung which once removed increases waste gate turbo chatter noise! it can be easily replaced if you require a quieter driving experience.   K&N Performance FILTERS increase horsepower and acceleration by dramatically reducing air flow restriction caused by the original factory design. They come with K&N's Million-Mile Limited Warranty. 57S series air-filter replace the factory air filter housing with a fully enclosed injection modified air box containing a reusable K&N air filter. Installation is easy as they are specifically engineered to use factory holes and mounting points. No additional hardware, cutting or drilling is required Pro Hose brings you another World leading quality hose, this Induction hose upgrade is available in the following colours Frozen White Bright Red Gloss Black Bright Blue Grey Please note: Custom colours are made to order, please expect a 5-10 day delay on custom colours.Peak show times may be a longer 7-10 day delay. Bring your 2016 Focus Mk3 RS engine bay to life with Pro-Hose, the Professional choice

Read more less

Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow, which improves performance, response, sound and aesthetics within the engine bay. AIRTEC part no: ATIKMINI04 TECHNICAL DATA Please note: This kit is designed to fit the 2006 to 2010 N14 engine model. If the car has a MAF sensor, you may have to trim the induction hose down to fit.  As part of our expanding Mini product range, AIRTEC Motorsport is proud to launch our induction kit suitable for track or fast road use. Developed in-house at AIRTEC HQ in the UK, we’ve created a comprehensive solution to improving the car’s original air intake system to allow more flow, which improves performance, response, sound and aesthetics within the engine bay. Our design replaces the upper part of the original air box with a laser cut alloy housing in a powder coated black finish. This allows our large, free-flowing foam air filter to fit in place and connects to the original intake pipe with a high quality Pro Hoses silicone hose and alloy intake connector. To ensure under bonnet heat soak issues do not occur, the air filter housing is fed a constant flow of fresh air through the shroud that attaches to the underside of the bonnet and guides air from the car’s original bonnet scoop directly onto the filter. The result is a kit that offers increased power, improved throttle response, heightened induction noise and a more pleasing look to the engine bay. The kit is a direct replacement that requires no additional drilling or cutting to fit and comes complete with all the correct fixtures and fittings, as well as detailed instructions. Please note: This kit is designed to fit the 2006 to 2010 N14 engine model. If the car has a MAF sensor, you may have to trim the induction hose down to fit.  Features: Comprehensive kit is a direct replacement Air guide directs cold air to the filter Large foam air filter for improved flow and increased performance Improved soundtrack and under bonnet appearance Long lasting, high quality black powder coat finish Direct fit and comes with all bolts, brackets and fixings AIRTEC Part No: ATIKMINI04

Read more less

Developed and manufactured at AIRTEC HQ in the UK, we’re proud to launch the most comprehensive and least restrictive induction kit available on the market for the Mk3 Focus ST and RS models. It’s suited to modified cars of all specifications, from mild to wild, and aimed at both track and fast road use. AIRTEC Part No: ATIKFO31 TECHNICAL DATA Developed and manufactured at AIRTEC HQ in the UK, we’re proud to launch the most comprehensive and least restrictive induction kit available on the market for the Mk3 Focus ST and RS models. It’s suited to modified cars of all specifications, from mild to wild, and aimed at both track and fast road use. The kit has been subject to a lengthy development and testing period in order to ensure it offers the highest levels of unrestricted air flow without compromise. As a result, the Stage 3+ kit features a huge AIRTEC Motorsport cone filter with a 102mm (4-inch) diameter trumpet that flows into 90mm (3.5-inch) diameter pipework to ensure there is minimal restriction. To further enhance this, the pipework takes the simplest and shortest path across the engine, and features only shallow bends to ensure flow remains as constant as possible. In order to allow clearance with the vastly increased pipework, a replacement engine cover is included as part of the comprehensive induction kit package, as is a deflector to help channel cool air towards the filter. As a result, this kit offers the ultimate in improved induction flow that’s above and beyond the ordinary kits found elsewhere on the market. Features: Huge cone filter 102mm trumpet 90mm pipework Replacement engine cover Air deflector shield Silicone hose joiners All fixtures and fittings AIRTEC Part No: ATIKFO31

Read more less

The kit fits neatly in place of the original items to improve the look of the engine bay and comes with all fixtures, fittings and instructions for a direct, bolt-on installation. Its improved air flow, performance and visual gains and straight forward fitment makes it an essential modification for all modified Hyundai i20N. TECHNICAL DATA As part of our expanding Hyundai product range, AIRTEC Motorsport is proud to launch our induction kit upgrade aimed at modified i20N owners who want to improve the performance of their car with a simple, bolt-on modification for track or fast road use. This freer-flowing induction kit replaces the car’s original air box and restrictive intake set up. It features a large, cotton AIRTEC filter that significantly improves the car’s breathing by increasing the amount of cold air it can take in and therefore increases power, performance and sound, thanks to a louder induction note. The large filter is protected from warm air within the engine bay by a laser cut heatshield and the replacement intake pipe tapers instantly to 80mm to improve internal capacity. Made from alloy, it allows a smoother flow in comparison to the original rubber, ribbed pipework that varies in diameter, and the pipe also removes the sound suppression chamber, which offers an improvement in noise and allows the pipe to maintain a consistent diameter. The kit fits neatly in place of the original items to improve the look of the engine bay and comes with all fixtures, fittings and instructions for a direct, bolt-on installation. Its improved air flow, performance, sound and visual gains, as well as its straight forward fitment make it an essential modification for all modified Hyundai i20N models. Key features: Improved air flow for power and performance increases Laser cut heatshield helps protects from warm air Large cotton air filter allows more flow Alloy intake pipe with increased flow and capacity High quality powder-coated black finish Pro Hoses silicone connectors included Full fitting instructions AIRTEC Part No:ATIKHYU5

Read more less